1. Lvyuan Filter-Industrial Water Filter Cartridge & Housing Manufacturer Since 2009.


Home   |   INFO CENTER   |   Blog   |  

How to Install Stainless Steel Filter Housing?

How to Install Stainless Steel Filter Housing?


High-quality, durable, and effective stainless steel filter housings are made to endure. Due to their corrosion resistance, these premium stainless steel 316L housings are suited for severe fluid conditions. Their structure also allows them to withstand high temperatures and pressures in various industrial environments.


These stainless steel water filter housings provide installation flexibility, as they may be mounted using the provided bracket or inserted inline in the pipes. Their ability to withstand temperatures up to 135 °C and pressure classes of up to 21 Bar guarantees reliability under extreme situations.


These filter housings stand out because, as you can see, they work with various filter cartridges. This adaptability guarantees the best possible filtering outcomes and permits wide compatibility. If you're looking for even more versatility and efficiency, modified variants are available in the filter family that can handle higher temperatures and pressure classes.

Preparations Before Installing

Before you install a water filter for your house, make sure you have the right cartridges and can pinpoint the source of the water quality issue. Also, before you begin, gather all of the necessary supplies and equipment. Some supplies are necessary to ensure the installation goes off without a hitch. Check the stainless steel filter housing unit's compatibility with your water filter and have a water filter cartridge ready before you begin.


◆ Connecting parts requires the right equipment, such as a wrench for SS filter housings.

 To provide a tight seal, join the house's perimeter and water main with pipe thread sealant or Teflon tape.

 Keep a basin or towel nearby if the appliance leaks while you're installing it.

 instruments for modifying internal relationships


The water supply should be turned off after you have collected all the required supplies for the installation. Just crank the handle in the opposite direction of the water flow to turn it off. It doesn't matter whether it rains; you can still install it. Reduce the system's water pressure and drain the water supply by opening a lower-level faucet. Also, release all pressure from the system before installation once the water runs dry.


You may use pipe thread glue or tape to secure the SS filter housing's input and output ports firmly. In this approach, we can be certain that no leaks will occur. Next, work your way clockwise around the threads, careful not to cross them. Continue until they are completely covered. Another option is the easy-to-use pipe thread sealant, which is applied in the specified manner.

Steps to Installation

In order to set up the filter's stainless steel housing, adhere to the following:

Step 1

Please remove any previous attachments before proceeding. Make sure everything fits snugly by greasing the end plate sealing, the inside and outside of the stainless steel water filter housing, and the plug.

Step 2

The next step is to install the membrane. Start by completely compressing the membrane after it is connected to the inflow head. Lubricate the water purification connection before putting it into the middle of the membrane element. Before reattaching the end cap to the membrane component, use a gasket to seal any excessively wide gaps.

Step 3

The next step is to insert the filter cartridge; the cartridge must be removed from its packaging prior to use. Refer to the box for instructions on appropriately placing the cartridge into the housing. Verify that the cartridge and housing are in the proper positions.

Step 4

After the installation of cartridges, is to mount the housing. Before installing the housing, ensure the water supply line is positioned perpendicular to the intake and output ports. Make use of your hands to secure the housing to the water supply line.


After that, twist it a quarter of a turn with the wrench until the stainless cartridge filter housing is tight. The fourth step is to use the saddles and strips to attach the membrane enclosure to the equipment racks that are stacked horizontally. Carefully tighten the screws so as not to break the stainless steel water filter housings or create leaks.

Step 5

Using saddles and strips, attach the membrane housing to the equipment racks in a horizontal orientation, and before turning off the water supply, be sure to turn off all the valves except the one nearest the faucet. Hold down the red pressure-relief button and slowly open the intake valve as water enters the housing.


After the water starts flowing, be sure to keep pressing the button. Carefully open the release valve to let air out of the line. To ensure the filter housing is waterproof, tighten any slack connections. All it takes is a few minutes of running water to remove any trapped air or debris.


Check whether the filter is effective by turning on the water supply to the faucet. A free flow of water should be checked. Be careful not to overtighten the connections when you use a wrench or filter housing wrench to secure any leaks you notice.


To find out how much pressure is in the water, just push the handle of the filtered water line faucet. Low pressure, sputtering, or inadequate water flow may all lead to a blocked filter cartridge. Before turning on the water, ensure the cartridge is in the right spot and the housing is snug. Additional information may be found in the instructions or by contacting customer care. If you want your filter to last and work properly, you must replace the cartridges often.

Precautions to Take

 After installing and pressurizing the membrane components, a high-pressure pump removes air from the stainless cartridge filter housing. The pump may be stopped after all the air has been discharged. Multiple process cycles were required to achieve the necessary sealing.

 Most top-entry stainless steel bag filter housings have a maximum water pressure specification. To avoid damaging or rendering the device ineffective as a filter, never exceed the water pressure recommended during installation.

● It is important to regularly inspect, clean, and replace the filter element of the stainless steel filter housing to ensure optimal performance after installation.

 Turn on the water supply once you've installed the filter and emptied the SS filter housing of any excess air. In this way, the filtering effect may be preserved.

 Before installing the SS water filter housing, read the instructions carefully to learn about its features, how it works, and any safety issues.

 Simply attaching the water intake line from the top entrance bag filter housings to a faucet allows customers to have filtered water whenever needed.

 Considering your consumption demands and water quality rules, choose the right filter element type and replacement cycle to ensure safe filtration and water quality.

 Lastly, regular cleaning and maintenance can extend the life of the SS cartridge filter housing and keep it in top operating shape.


To prevent any problems, be sure to oil the seals well before placing the end cap.

Lvyuan Filter is your one-stop shop for residential water filtration systems. Each stainless steel water filter housing is constructed to exacting standards, ensuring that it will last and work reliably even after extensive testing. These water filter housings' superior filtration and separation performance is due to their construction using premium stainless steel.


+86 15975359293
+86 020-34460508
+86 020-34425655

Our company always insists on product quality is life, our aim is to provide more professional and attentive services for our global customers.

Chat Online 编辑模式下无法使用
Leave Your Message inputting...