MBR membrane
Daily instead of 3 m large flow water filter should be?
by:Lvyuan
2021-01-22
In daily work, 3 m high flow rate of water filter should be disinfected, installation and maintenance, it is almost always need to do, only in this way can use 3 m large flow water filter to do good work, to better achieve its effect.
3 m high flow rate of water filter disinfection techniques:
3 m high flow rate of water filter before use, please use first steam sterilization, disinfection is divided into steam sterilization and disinfection two online in disinfection cabinet.
a, disinfection cabinet disinfection: the 3 m large flow filter are taken from the plastic bags, placed in disinfection cabinet disinfection under 121 ℃ and a half hours.
2, online disinfection: the 3 m large flow filter in the correct way to install inside the filter ( Fixed plate and 3 m large flow filter from 0. 5毫米) Steam and a half hours.
3 m high flow rate of water filter installation process:
(1) the o-rings moist, slowly insert 3 m large flow filter straight;
2. Don't put the big 3 m flow filter fastening too tight;
3. Avoid direct contact with the hand of 3 m large flow filter;
(4) washed 3 m as far as possible big flow filter before use.
3 m large flow filter maintenance techniques and methods:
3 m large flow filter used to can't meet planning flow, open the filter after downtime, 3 m large flow out of the filter cartridge, scour exterior dirt on the faucet, then first in 4% hydrochloric acid soaking for 24 hours, and then soaked in 4% sodium hydroxide after 24 hours, the faucet on rinse again, check whether the o-ring is damaged, if damaged, please replace the o-ring, then according to the 3 m big flow filter device to device good 3 m big flow filter, in less than 0. 1 mpa pressure flushing.
such as 3 m after the big flow filter used to treat with long downtime, please take out the 3 m large flow filter, according to the above, by the way after cleaning, dry properly keep when starting up again.
3 m high flow rate of water filter disinfection techniques:
3 m high flow rate of water filter before use, please use first steam sterilization, disinfection is divided into steam sterilization and disinfection two online in disinfection cabinet.
a, disinfection cabinet disinfection: the 3 m large flow filter are taken from the plastic bags, placed in disinfection cabinet disinfection under 121 ℃ and a half hours.
2, online disinfection: the 3 m large flow filter in the correct way to install inside the filter ( Fixed plate and 3 m large flow filter from 0. 5毫米) Steam and a half hours.
3 m high flow rate of water filter installation process:
(1) the o-rings moist, slowly insert 3 m large flow filter straight;
2. Don't put the big 3 m flow filter fastening too tight;
3. Avoid direct contact with the hand of 3 m large flow filter;
(4) washed 3 m as far as possible big flow filter before use.
3 m large flow filter maintenance techniques and methods:
3 m large flow filter used to can't meet planning flow, open the filter after downtime, 3 m large flow out of the filter cartridge, scour exterior dirt on the faucet, then first in 4% hydrochloric acid soaking for 24 hours, and then soaked in 4% sodium hydroxide after 24 hours, the faucet on rinse again, check whether the o-ring is damaged, if damaged, please replace the o-ring, then according to the 3 m big flow filter device to device good 3 m big flow filter, in less than 0. 1 mpa pressure flushing.
such as 3 m after the big flow filter used to treat with long downtime, please take out the 3 m large flow filter, according to the above, by the way after cleaning, dry properly keep when starting up again.
Custom message