The design of Lvyuan sintered stainless steel filter elements meets the market trend of pool accessories. It is created by designers who combine the modern demands for pool accessories with high practicability. Being thermally welded, its caps are not prone to crack or fall off2.
The product plays an important role and has been deeply trusted by our customers. It can also filter particulates, microbial organisms, ferric oxide, and other impurities3.
The product is completed to the highest of standards for reliability and performance within the industry. With a large number of tapered fixing holes inside, it has a high dirt holding capacity4.
It meets all performance requirements in its industry. It has a large effective filter area5.
sintered carbon water filter is located in the high-end market. The inner support layer is closely connected to the filter material, making it of strong impact resistance
Sintered Titanium water filter cartridge is based on pure titanium powder (99.7% or higher) as the main raw material, made through high temperature sintering process. The uniform structure, small pore density is high, the filtration resistance, good permeability. Also it has the high filtration precision, acid & alkali corrosion, high temperature resistant characteristic. It can be used for solid liquid, gas separation and purification. The service performance is excellent, but the suction filter and press-filter, it will not form secondary pollution, simple operation, it can be on-line regeneration, easy to clean, and long service life.
◪ Uniform structure, narrow pore size distribution, and high separation efficiency.
◪ High porosity, the resistance of filtration less, and the penetration efficiency is high.
◪ High temperature resistant, it can be normally used below in 280 degree.
◪ Good chemical stability, acid & alkali corrosion resistance, and oxidation resistance.
◪ No particles fall off, it will not make the concentrate form secondary pollution, it conforms to be food hygiene and pharmaceutical GMP requirements.
◪ Good mechanical performance, it can have the suction filtration and press-filtration, simple operation.
◪ Low differential pressure, the area of cover is small, and large water flow rate;od mechanical performance, it can have the suction filtration and press-filtration, simple operation.
◪ Strong antimicrobial ability, no microbes.
◪ The finished-products technology is good, the overlength of overall length can be reached to 1000mm.
◪ It can be on-line regeneration, easy to clean, and long service life.
|Fiter Cartridge dimensions|
|Length||5’’ (125mm), 10’’ (250mm), 20’’ (500mm), 30’’ (750mm), 40’’ (1000mm）|
|Diameter||Ø22, 30, 50, 60, 70, 80, 100, 120mm|
|Other dimensions||Customized by customer’s request.|
|Material of constructions|
|Connector type||Flat, Insert type, Thread type, Fin|
|End caps||DOE, 215, 222, 226, M20, M30, M42 or as request.|
|Sealing material||Silicone, NBR, EPDM, Fluoro rubber, etc|
|Removal rate||0.1, 0.45, 1, 3, 5, 10,20, 30, 40, 50, 100um|
|Temperature Tolerance||≦ 300℃ wet|
|Permeability||0.02-20L/cm2 min Pa|
|Maximum Operating Pressure differential||6.0 bar|
|Flow rate (L/H)||180, 200, 250, 280, 300, 350, 500, 800, 1000, 1500, 1600|
◆◆Pure water flow rate reference table: the initial value of 10'' sintered titanium cartridge (P=0.2 MPa, 1cP, 25℃)
|Micron rate (μm)||0.2||0.45||1||2||3||5||10||20||30|
|Flow rate (L/H)||180||200||250||280||300||350||500||800||1000|
Various end caps. End caps can be customized as request.
Various dimensions. Dimension can be customized as request.
Wall thickness can be tailor made as request, 1mm, 2mm, 3mm, etc.
Food and beverage industry
As time goes by, the technical strength of Lvyuan continues to increase.2.
Accurate market positioning of Lvyuan Water Purification Equipment allows you the highest return on investment. Get an offer!