Lvyuan pleated filter sizes is designed with a combination of different effects. The designers, based on the ergonomics, strive to create a product which integrates the shock absorption, bending, and slip prevention. It is manufactured from 100% Polypropylene construction2.
By stressing the value of quality management,the quality of pleated water filters are more assured. The graded gradient design helps it to avoid rapid clogging3.
The product has good contact performance. All its parts have been professionally welded and soldered with advanced technique. It has found a variety of applications ranging from industrial, chemical process, food and beverage, cosmetics and water4.
It is renowned for security. It is built with safety mechanisms, including overpressure protection, which aims to prevent any accidents. It contains no binders, agents, solvents, antistatic materials or wetting agents5.
It has good strength. It has a proper size which is determined by the forces/torques applied and the materials used so that failure (fracture or deformation) would not occur. With a large number of tapered fixing holes inside, it has a high dirt holding capacity
PP pleated filter cartridge deliver high efficiency and consistent filtration of fluids in a wide range of critical applications.
They are constructed of pleated membrane filter media that provides removal of particles from 0.1 to 60um, the pore size is not affected by the vibration of feeding pressure, due to its unique low differential pressure, high flow volume, excellent filtration microns.
The high surface area ensures long service life and low initial pressure drops. All cartridges hardware components are made from high purity polypropylene materials for use in critical process application. All the Cartridges are manufactured and assembled in a clean room environment to minimized the possibility of contamination.
This type of cartridges are available in a wide range of configurations to fit most commercially available filter housings.
◪ Excellent chemical compatibility. Suitable for filtering organic solvents, acid bases.
◪ The multi layers PP membrane structure enables a graded filtration pore sizes and increases the dirt-holding capacity of the PP pleated water cartridge filters.
◪ Large flow volume, low differential pressure and long service life.
◪ Hydrophilic membrane with high flow.
◪ Pleated design increased the filtration area for deep filtration.
◪ Application of thermal-bonding technique, strong and no any pollution.
◪ Full rage of removal microns ratings.
◪ Graded pore density for high dirt holding capacity.
◪ Common use in clean and sterilize with cabinet & steam with high pressure.
|Outer diameter||2.7'' , customized|
|Length||9.75'', 10'', 20'', 30'', 40'' customized|
|End cap||DOE, 215, 222, 226, FIN, FLAT, Stainless steel, or customized.|
|Filtration area||0.4-0.7m² (10'')|
|Max.operating temperature||88℃, 0.28Mpa. 60℃, 0.42Mpa.|
|Micron rating(μm)||0.1, 0.2, 0.45, 0.65, 1, 2, 3, 5, 10, 20, 25, 30, 50, 60|
Polypropylene end caps are thermally bonded to the media packs eliminating any need for adhesives which might react with or contaminate critical process fluids. Strong and no any pollution.
High efficiency 100% all polypropylene cartridges with hard polypropylene support inner core and outer core. We provide customized sizes to meet different customers’ required.
Different end caps to fits any filter housing and filtration industry, 100% all pure polypropylene pleated material without any organic binder.
DOE 20 inch PP material pleated filter cartridge with EPDM gasket, graded-porosity multi-layer.
Reverse osmosis water system prefiltration
Filtration of mineral water
Filtration of organic solvent & ink
Filtration of pharmaceuticals
Guangzhou Lvyuan Water Purification Equipment Co., Ltd. has established large-scale bases for pleated water filters .2.
Our firm bears societal responsibilities. We are always focusing on boosting the eco-efficiency of the business by providing the right technology.