Lvyuan sintered filter cartridge is produced with mature technology. It has been processed under imported heat treating equipment to guarantee its certain physical properties. It has found a variety of applications ranging from industrial, chemical process, food and beverage, cosmetics and water2.
This product has been widely used in the market and has a broad market prospect. It can also filter particulates, microbial organisms, ferric oxide, and other impurities3.
The product is not susceptible to discoloration. It is not prone to tarnish when it is contacted with sulfur compounds. With a large number of tapered fixing holes inside, it has a high dirt holding capacity4.
The product is water resistant. Its fabric is capable of handling a lot of exposure to moisture and has good water penetration. It comes with a wide range of lengths for standard and full-flow housings5.
The product has no flaws. It is made by using precision machinery such as CNC machine which is high precision. Being thermally welded, its caps are not prone to crack or fall off
Sintered Titanium water filter cartridge is based on pure titanium powder (99.7% or higher) as the main raw material, made through high temperature sintering process. The uniform structure, small pore density is high, the filtration resistance, good permeability. Also it has the high filtration precision, acid & alkali corrosion, high temperature resistant characteristic. It can be used for solid liquid, gas separation and purification. The service performance is excellent, but the suction filter and press-filter, it will not form secondary pollution, simple operation, it can be on-line regeneration, easy to clean, and long service life.
◪ Uniform structure, narrow pore size distribution, and high separation efficiency.
◪ High porosity, the resistance of filtration less, and the penetration efficiency is high.
◪ High temperature resistant, it can be normally used below in 280 degree.
◪ Good chemical stability, acid & alkali corrosion resistance, and oxidation resistance.
◪ No particles fall off, it will not make the concentrate form secondary pollution, it conforms to be food hygiene and pharmaceutical GMP requirements.
◪ Good mechanical performance, it can have the suction filtration and press-filtration, simple operation.
◪ Low differential pressure, the area of cover is small, and large water flow rate;od mechanical performance, it can have the suction filtration and press-filtration, simple operation.
◪ Strong antimicrobial ability, no microbes.
◪ The finished-products technology is good, the overlength of overall length can be reached to 1000mm.
◪ It can be on-line regeneration, easy to clean, and long service life.
|Fiter Cartridge dimensions|
|Length||5’’ (125mm), 10’’ (250mm), 20’’ (500mm), 30’’ (750mm), 40’’ (1000mm）|
|Diameter||Ø22, 30, 50, 60, 70, 80, 100, 120mm|
|Other dimensions||Customized by customer’s request.|
|Material of constructions|
|Connector type||Flat, Insert type, Thread type, Fin|
|End caps||DOE, 215, 222, 226, M20, M30, M42 or as request.|
|Sealing material||Silicone, NBR, EPDM, Fluoro rubber, etc|
|Removal rate||0.1, 0.45, 1, 3, 5, 10,20, 30, 40, 50, 100um|
|Temperature Tolerance||≦ 300℃ wet|
|Permeability||0.02-20L/cm2 min Pa|
|Maximum Operating Pressure differential||6.0 bar|
|Flow rate (L/H)||180, 200, 250, 280, 300, 350, 500, 800, 1000, 1500, 1600|
◆◆Pure water flow rate reference table: the initial value of 10'' sintered titanium cartridge (P=0.2 MPa, 1cP, 25℃)
|Micron rate (μm)||0.2||0.45||1||2||3||5||10||20||30|
|Flow rate (L/H)||180||200||250||280||300||350||500||800||1000|
Various end caps. End caps can be customized as request.
Various dimensions. Dimension can be customized as request.
Wall thickness can be tailor made as request, 1mm, 2mm, 3mm, etc.
Food and beverage industry
Guangzhou Lvyuan Water Purification Equipment Co., Ltd. has independently researched and developed several new sintered filter cartridge that take leading positions both at home and abroad2.
Always polite and responsible to our customers in Guangzhou Lvyuan Water Purification Equipment Co., Ltd.. Ask!