The production technology of Lvyuan sintered metal filter elements is greatly optimized. Its filter medium is customizable according to the different water quality in the application2.
The product, with an increasing reputation in the market, has a great developmental prospect. The filter media is thermally bonded to prevent fiber release while providing consistent flow rates3.
The product has internationally certified quality and long service life. It is resistant to putridity, acid and alkali, organic or inorganic solvent4.
The product is tested to meet the quality standards as per the customer demands. With a large number of tapered fixing holes inside, it has a high dirt holding capacity5.
It will go through multiple processes to make quality guaranteed before loading. It is manufactured from 100% Polypropylene construction
Sintered Titanium water filter cartridge is based on pure titanium powder (99.7% or higher) as the main raw material, made through high temperature sintering process. The uniform structure, small pore density is high, the filtration resistance, good permeability. Also it has the high filtration precision, acid & alkali corrosion, high temperature resistant characteristic. It can be used for solid liquid, gas separation and purification. The service performance is excellent, but the suction filter and press-filter, it will not form secondary pollution, simple operation, it can be on-line regeneration, easy to clean, and long service life.
◪ Uniform structure, narrow pore size distribution, and high separation efficiency.
◪ High porosity, the resistance of filtration less, and the penetration efficiency is high.
◪ High temperature resistant, it can be normally used below in 280 degree.
◪ Good chemical stability, acid & alkali corrosion resistance, and oxidation resistance.
◪ No particles fall off, it will not make the concentrate form secondary pollution, it conforms to be food hygiene and pharmaceutical GMP requirements.
◪ Good mechanical performance, it can have the suction filtration and press-filtration, simple operation.
◪ Low differential pressure, the area of cover is small, and large water flow rate;od mechanical performance, it can have the suction filtration and press-filtration, simple operation.
◪ Strong antimicrobial ability, no microbes.
◪ The finished-products technology is good, the overlength of overall length can be reached to 1000mm.
◪ It can be on-line regeneration, easy to clean, and long service life.
|Fiter Cartridge dimensions|
|Length||5’’ (125mm), 10’’ (250mm), 20’’ (500mm), 30’’ (750mm), 40’’ (1000mm）|
|Diameter||Ø22, 30, 50, 60, 70, 80, 100, 120mm|
|Other dimensions||Customized by customer’s request.|
|Material of constructions|
|Connector type||Flat, Insert type, Thread type, Fin|
|End caps||DOE, 215, 222, 226, M20, M30, M42 or as request.|
|Sealing material||Silicone, NBR, EPDM, Fluoro rubber, etc|
|Removal rate||0.1, 0.45, 1, 3, 5, 10,20, 30, 40, 50, 100um|
|Temperature Tolerance||≦ 300℃ wet|
|Permeability||0.02-20L/cm2 min Pa|
|Maximum Operating Pressure differential||6.0 bar|
|Flow rate (L/H)||180, 200, 250, 280, 300, 350, 500, 800, 1000, 1500, 1600|
◆◆Pure water flow rate reference table: the initial value of 10'' sintered titanium cartridge (P=0.2 MPa, 1cP, 25℃)
|Micron rate (μm)||0.2||0.45||1||2||3||5||10||20||30|
|Flow rate (L/H)||180||200||250||280||300||350||500||800||1000|
Various end caps. End caps can be customized as request.
Various dimensions. Dimension can be customized as request.
Wall thickness can be tailor made as request, 1mm, 2mm, 3mm, etc.
Food and beverage industry
We have our own manufacturing plant. It has been constructed exclusively for R&D trials, design of experiment, initial process development, as well as QC activities.2.
Guangzhou Lvyuan Water Purification Equipment Co., Ltd.'s mission: manufacture reliable products at competitive prices. Contact us!