PP filter element-Lvyuan Water Purification Equipment
PP filter element (also known as melt blown filter element) is a filter material made of non-toxic and odorless polypropylene as raw material, which is heated and melted, sprayed, drawn, and received. The pp filter element has a deep filtration structure with uniform pore size, sparse outside and dense inside, and has excellent characteristics of high filtration efficiency and acid and alkali resistance. Can effectively remove suspended solids, particles, rust and other impurities in the liquid.
The PP filter element is made of polypropylene (PP) by hot melt, and its micron number ranges from 1um to 300um. The filter element has no inner shaft and adopts inner density and outer sparse design, which not only can maintain stable flow, pressure difference and service life, but also has excellent deep filtration effect and pollutant accumulation. It is a kind of high efficiency, low pressure difference and long service life. And a wide range of filter elements. Because the chemical composition of PP is clean and meets food hygiene standards, it will not cause secondary pollution to the liquid to be filtered due to the material. It has the characteristics of large flow, high precision, corrosion resistance and high pressure resistance. It is widely used in PCB and electroplating. , Pure water, food and drinking water pre-filtration treatment; RO pre-filtration treatment, etc.
The PP filter element is made of ultra-fine polypropylene fiber thermally entangled. Superfine fibers rely on self-bonding and entanglement to randomly form a three-dimensional microporous structure in space. The connection between fibers does not require any adhesives. It has the characteristics of gradient changes in radial fibers. It is a porous and fabric filter medium. Complex. On the one hand, it can form deep filtration (features of porous filter materials), on the other hand, it can form surface filtration (features of fabric filter materials). It is a composite filter material that integrates pre-filtration, fine filtration and gravity sedimentation. It has been widely used in the purification of drinking water, the filtration of industrial pure water and the filtration of other fluids.
The PP filter element has high filtration efficiency, low pressure loss, stable filtration efficiency, long service life, low filtration cost, good safety and strong adaptability.
The new meltblown filter element is different from the traditional fabric filter material. This material has a very thin filament diameter, often less than 5-25 microns, and the fiber presents an irregular porous network structure. The average diameter is less than 40 microns, and the average porosity is greater than 75%. The structure is very reliable for the control of filtration accuracy.
The fine fiber layer inside the PP filter element and the loose fiber layer outside form a double-layer fiber structure, which effectively reduces pressure loss and maintains a stable filtration efficiency. The pore size of the PP filter element is distributed in a gradient along the diameter direction. During filtration, the larger pore size can accommodate larger particles and impurities to ensure that the filter element will not be blocked quickly, while providing good shape rigidity; small pore size parts It can block fine particles and ensure the filtration accuracy, thereby avoiding the shortcomings of fast clogging and short life of the high-precision filter element. It also reduces the filtration resistance, reduces the energy consumption of the equipment, and extends the service life of the filter element.
The filter material of the PP filter element is made of non-toxic and odorless PP material. The raw material source is reliable and safe. No other chemical substances are generated during the production process. It can be directly used in drinking water and beverage products, and because there is no adhesive medium, it is used No soluble material appears. Resistant to mildew, acid and alkali, organic or inorganic solvents (except chlorosulfonic acid, concentrated nitric acid and strong oxidants).
PPF (polypropylene melt blown filter element)-10 (length 10 ')-5 (filtration precision 5μm)
PPF-P (Polypropylene melt blown filter element with skeleton)-10 (length 10 ')-5 (filtration precision 5μm)
PPF-D (polypropylene big fat melt blown filter element)-10 (length 10 ')-5 (filtration precision 5μm)
Length 5″ 10″ 20″ 30″ 40″ 50″ 60″
Outer diameter (±1mm) 60 ~ 115 mm
Inner diameter (±1mm) 28, 30 mm
◎It can effectively remove all kinds of particulate impurities in the filtered liquid;
◎Multi-layer deep structure, large dirt holding capacity and long service life;
◎Large filtration flow and small pressure difference;
◎Does not contain any chemical adhesives, more hygienic and safer;
◎Resistant to acids, alkalis, organic solvents, oils, and good chemical stability;
◎Low cost and easy replacement.
◎It integrates surface, deep, coarse and fine filtration; it has the characteristics of large flow, corrosion resistance, high pressure and low cost. It is used to block large particles such as rust, sand, and insect eggs in the water.
Length 5 inches, 10 inches, 20 inches, 30 inches, 40 inches
Outer diameter 60-65mm
Inner diameter 28-30mm
Withstand pressure 0.4 MPa
Maximum applicable temperature 60℃
Drinking water and food industry, water treatment related systems
R.O. and general water treatment, etc.
Filtration of acid and alkali liquids in chemical processes;
Filtration of chemical raw materials and organic solvents; filtration system of water-soluble paints, oils and coatings;
Electrophoresis coating (ED), filtration of chemical liquids; filtration of mechanical oil, cutting oil, heavy oil, and fuel;
Filtration of edible oil and vegetable oil;
Filtration of all kinds of syrups, chocolate, etc.;
Filtration of imaging liquid and ink; filtration of PCB liquid;
Filter treatment before sterile water and ultrapure water;
Industrial water, electroplating solution filtration, industrial pure water filtration front system.
Filter precision: 1μm, 5μm, 10μm, 20μm, 30μm, 50μm, 100μm.
Filter element length: 10, 20, 30, 40 inches.
Filter connection: such as flat pressure type, plug-in type: 215, 222, 226 three.