Requirements and main performance of PP filter element for influent water quality

PP filter element (also known as meltblown filter element) is a filter material made of non-toxic and odorless polypropylene as raw material, which is heated and melted, sprayed, pulled, and shaped. The pp filter element has a deep filtration structure with uniform pore size, sparse outside and dense inside, and has the excellent characteristics of high filtration efficiency and acid and alkali resistance. It can effectively remove suspended solids, particles, rust and other impurities in the liquid. PP filter element is an important water treatment consumable in water purifier. With the continuous improvement of people's quality of life, the safety of drinking water has attracted people's attention. Filter products include OSMONICS filter, 3M-CUNO filter and Pall filter. PP filter element requirements for the water quality of the inlet water If the inlet water pressure is too large, a pressure reducing valve needs to be installed in front of the water purifier, and if the inlet water pressure is too small, a booster pump needs to be added. The PP filter element also has certain requirements for the inlet water temperature. The inlet water must use normal temperature tap water instead of hot water. Install the water purifier before the hot temperature device such as the water heater. The installation position of the water purifier needs to be lower than the position of the water heater. , to prevent the steam from the water boiler from entering the water purifier and causing damage to the filter element. All pipelines, joints, faucets and other wading accessories on the water purifier must meet the national hygiene standards. In northern regions, temperature must be taken into account when installing water purification equipment, to prevent the filter element from freezing and cracking in winter, and to prevent direct sunlight. When installing, it should be fixed to prevent it from slipping. Overview of the main performance of PP filter element PP filter element mainly plays a pre-purification role in the equipment. The filter element is generally made of polypropylene. The filter element is a precision consumable. It must be replaced after the first stage of use. The recommended replacement time is about 1 year. The specific replacement time should also take into account the local water quality. Its main function is to remove impurities larger than 5 microns in water, bacteria, viruses, rust and other harmful substances. The filter element has a certain service life, so in the process of use, it must be operated correctly in accordance with the PP filter element manufacturer's instructions to avoid damage to the PP filter element, resulting in the water purifier being unusable or the water quality of the water not meeting the standard.
As we have known for quite some time, the success of Lvyuan in the future will depend greatly on our ability to strike a balance between valuable human insight and interaction with technology.
We believe our capacity can give you an impressive experience by using water filter cartridges supplier.
The global market is estimated to reach a value of almost water filter cartridges in the next decade. have a robust position in the filter cartridge supplier market because of its proven high potency in water filters.