Lvyuan Industrial Filtration Solution

ShIP to

English

Use sintered stainless steel filter element

by:Lvyuan      2021-01-25

I believe you are no stranger to sintered stainless steel filter element. This product has been widely used in our lives. Many people know it, but do not know it. Next, I will introduce you to use this product. what is the benefit.
   1. Separation of solid impurities
   sintered stainless steel filter element itself has a certain weight, and if it is separated by solid impurities, then it can prevent some hard objects from causing corresponding scratches on the machine, thereby damaging the machine. It can be said that the solid impurities separation of the filter element can make the impurities better separated.
Sintered stainless steel filter element
  2, make the separated water more pure
The sintered stainless steel filter element separates the oil and water, allowing the water to coalesce into large water droplets, and then sink to the bottom, which also enables the oil to start a secondary separation. It can be said that this type of separation also promotes the water to flow out. The cleanliness level has been greatly improved. At the same time, during the separation, the whole separation process is also very fast, and the time consumed is also very short. This invisibly also further improves the efficiency of the equipment. Better reduce costs.
  3. Improve the quality of the product
It can be said that through the filtering effect of the sintered stainless steel filter element, the quality of the product can be better improved. It can be said that this better meets the requirements of people for the fine level of the product, and thus can better improve the product itself quality.


What should be considered when purchasing a sintered stainless steel filter element?


 Sintered stainless steel filter element is mainly used for filtration applications of vacuum pumps. Although it is only a small material, it has a very large purpose and is an indispensable material. What should we consider when purchasing?
   If you just buy a single sintered stainless steel filter element, it is definitely not cheaper than buying a whole batch. If you want to buy a good quality product and want a reasonable price, how should you choose?
1. When purchasing, you need to find a suitable manufacturer of sintered stainless steel filter elements. To tell the truth, manufacturers are not too easy to find, because there are too many manufacturers of this kind of products, and it is not clear how to choose, so when choosing We try our best to choose famous manufacturers from large manufacturers, so that the quality is guaranteed to a certain extent, so we can use them with confidence.
Sintered stainless steel filter element
2. I have found a suitable manufacturer of sintered stainless steel filter elements, but the price has become a problem. We can communicate with the business regarding the price. If the manufacturer must be lowered in wholesale, try to wholesale in large quantities as much as possible. The price is lowered and the purchase is more affordable.
Many friends think that the sintered stainless steel filter element is a low-value consumable, and it is a material we often buy. For manufacturers, the price of a product is only a fraction of a fraction. There is no need to care too much, no need to consider too much. The idea is definitely incorrect, because although its price is low, buying in large quantities is a lot of expense, so please choose carefully to save costs when buying.


How to maintain the sintered stainless steel filter element if it is not used for a long time?

If the sintered stainless steel filter element is not used for a long time, maintenance is required. The product can only be used frequently to ensure the stability of its performance. Therefore, when the product is not used for a long time, we must pay attention to its maintenance. So how should it be maintained?
When the sintered stainless steel filter element has not been used for a long time, we must discharge the filtrate on the surface of the product cleanly, and carry out the cleaning and drying process. After completing this series of operations, put the product in a clean plastic bag and seal it. This is for Make sure that the product is not contaminated, and then store the product in a dry place.
   Generally, the sintered stainless steel filter element that has not been used for a long time should be soaked in a strong acid detergent for about 24 hours. Remember, the temperature of the acidic liquid should be maintained at about 25-50 degrees! In the process of soaking, it is recommended that the proportion of acid and alkali in the liquid should be controlled at 20%. This is to prevent the liquid from damaging and contaminating the product. Under normal circumstances, lotion products with higher protein factors are very effective both in terms of cleanliness and economy! Therefore, an enzyme solution with a higher protein content should be used for cleaning. After cleaning, it must be cleaned a second time, and steam is used for overall disinfection. This link is extremely important for its maintenance.
Sintered stainless steel filter element
The sintered stainless steel filter element should pay attention to a certain time and temperature during the disinfection process. Generally, the filter product inside should be placed in a disinfection cabinet at 130℃/20 minutes. The disinfection temperature should not exceed 150℃, and the disinfection time should not exceed 30 minutes. . Keep in mind that if the sterilization temperature is too high, or the time is too long, and the pressure is too high, it will cause overall damage to the elements in the filter.
The above is the maintenance method summarized by lvyuan water filter factory when the sintered stainless steel filter element is not used for a long time. Only regular maintenance of the product can ensure that there will be no problems in the application process. The user provides services.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...