activated carbon sintered plastic filter rod for food and beverage

Latest products

sanitary filter housing stainless

High porous filter liquid cartridge filter 1/5/10/20 microns plastic tablet PE water filter

High-Performance Sanitary Filter Housings in Stainless Steel

Customized Stainless Steel SS Gas Vent Filter Housing

Product Information
Feedback

Company Advantages
1. The design of sintered plastic filter shows a strong sense of art. With a large number of tapered fixing holes inside, it has a high dirt holding capacity
2. The product is getting an increasing application in the market. The filter media is thermally bonded to prevent fiber release while providing consistent flow rates
3. The quality of this product is guaranteed because it has passed international certification such as ISO certification. Being thermally welded, its caps are not prone to crack or fall off
4. This product is highly regarded among customers, with high durability and high cost performance. It is suitable to use with aqueous and organic solvent samples due to its broad chemical compatibility
5. The product is guaranteed to be of consistent quality with the adoption of the statistical quality control technique. It offers excellent filtration and good thermal stability

activated carbon sintered plastic filter rod for food and beverage-1

Lvyuan produces wide ranges of sintered porous plastic filter products, including porous PE, HDPE, PTFE, PVDF, PA, Nylon 6, with shapes of tube, rod, candle, sheet etc. With various filtration rate, shapes and features, sintered porous plastic filter cartridges are widely used in water treatment, chemical engineering, medical treatment, automobile, environmental protection and other industries, such as oil water separator and silencer, drunk driving tester, blind plug for medial treatment, syrup and grease filter device, anti-explosion slices for industrial battery, acid-proof slices for automobile battery, waste water treatment, water purification filter system and more.

◆◆ Lvyuan sintered porous platics filters can meet requirements of different customers. Custom molded Shapes are available.

PE and HDPE Sintered filter cartridge：
Sintered Porous Polyethylene (PE) products are the most commonly used plastic filter element in the world. Porous PE plastics is strong, lightweight thermoplastic with strong chemical (acids and alkali) resistance and wide micron rates from 1 to 200um. There’re Ultra-high molecular weight Polyethylene (UHMWPE) and High-density Polyethylene (HDPE) available in tubes, sheets, rods and molded shapes available for different applications.

PTFE Sintered filter cartridge:
Micro Porous PTFE filter elements are produced by sintering pure PTFE (Polytetrafluoroethylene) granules, no other substances are used in the construction. These filter elements are usually offered when only 100% pure disposable PTFE can be used. The advantage of PTFE is a higher maximum temperature, up to 200℃, and somewhat better chemical resistance. These filter elements should be ultrasonically cleaned to give best results.

PVDF Sintered filter cartridge:
Sintered porous PVDF (Polyvinylidene fluoride) products are good choices when expose to harsh thermal, ultraviolet, ozone and chemical conditions. Porous PVDF prdoucts is extreme hard and with average pore size of 25 micron. It can work in temperature from -62 to 149℃.

PA/Nylon Sintered filter cartridge:
Nylon, trade name for polyamides (PA), is a semi-crystaline polymer that contains amine and carbonyl groups. There’re numerous versions. Nylon/PA has high strength and thermal resistance with a softening termperature of 190℃. Working temperature from -40℃ to 121℃, sintered PA/Nylon porous products have very high tensile strength, good abrasion and chemical resistance, and low coefficient of friction.

Product Feature

◪ High porosity (60%) to ensure a greater flow per unit area;
◪ Smooth outer surface, impurities are not easy adhesion, back washing easy and thorough;
◪ Anti-fouling ability: the small size of the filter so that impurities can’t be retained in the filter body;
◪ Resistance to strong acid, alkali corrosion, resistance to organic solvents;
◪ Excellent mechanical properties;
◪ No particle release.
◪ Product range and wide scope of application

Product Parameter

Fiter Cartridge dimensions
Regular size (mm)	31x12x1000, 31x20x1000, 38x20x1000, 38x18x1000, 38x20x1200, 38x20x1300, 38x20x150, 38x20x400, 38x20x250, 38x20x200, 38x20x180, 38x20x150, 50x20x1000, 50x31x1000, 50x38x1000, 65x31x1000, 65x38x1000, 64x44x1000, 78x62x750mm, etc.
Other dimensions	Customized by customer’s request.
Material of constructions
Filter media option	PE, HDPE, PTFE, PVDF, PA/Nylon etc
Connector type	Flat, Insert type, Thread type, Fin
End caps	PP, M36, M30, M25, M22, M14, M12, or as request.
Performance
Removal rate	0.3, 0.45, 1, 3, 5, 10,20, 30, 40, 50 μm
Maximum Operating Temperature	≦ 82 ℃
Maximum Operating Pressure	6.0bar

Product Details

activated carbon sintered plastic filter rod for food and beverage-2

part.1

Double open end or single open end

activated carbon sintered plastic filter rod for food and beverage-3

part.2

Welded with screw cap

activated carbon sintered plastic filter rod for food and beverage-4

part.3

Various dimension

activated carbon sintered plastic filter rod for food and beverage-5

part.4

Various design according to your drawing

Product Applications

activated carbon sintered plastic filter rod for food and beverage-6

Pharmaceutical and medical

activated carbon sintered plastic filter rod for food and beverage-7

Air and gas purification

activated carbon sintered plastic filter rod for food and beverage-8

Oil and gas filtration

activated carbon sintered plastic filter rod for food and beverage-9

Chemical industry

activated carbon sintered plastic filter rod for food and beverage-10

Water Treatment

activated carbon sintered plastic filter rod for food and beverage-11

Machinery and Pneumatics

Company Features
1. Our in-house manufacturing team is equipped with considerable experience in producing quality products. They utilize lean manufacturing principles to meet production standards.
2. To provide best service for customers, Guangzhou Lvyuan Water Purification Equipment Co., Ltd. will collect needs of customers. Call now!

c******u

We have a complete procurement chain and quality control system, insist on selecting high-quality raw materials to produce sintered stainless steel filter elements, and strictly control every link of sintered stainless steel filter elements production, and comprehensively control product quality, so that all sintered stainless steel filter elements have superior quality quality.

e******v

The sintered plastic filter manufactured by us with advanced design concepts not only strives for excellence in workmanship, scientific and reasonable design, but also has stable performance and durability, which can meet customers' needs for high-quality products.

x******l

sintered plastic filter High-quality materials are used, combined with advanced technology for processing, so that all aspects such as quality and performance can reach national standards.

d******o

Guangzhou Lvyuan Water Purification Equipment Co., Ltd. has an experienced production team, which provides a strong guarantee for the high output of sintered plastic filter. Not only that, the company has also set up a QC team, which is responsible for testing the quality of sintered plastic filter to ensure its quality Superior, extraordinary quality.

a******s

For many years, the company has always adhered to the production concept of "real materials, exquisite workmanship", and strictly controls the quality of every important production link from the selection of raw materials to the delivery of finished products to ensure that the sintered plastic filter produced are all qualified products that meet national standards. .

e******e

Advanced testing equipment and perfect quality assurance system ensure high quality products. It can help enterprises decrease the cost and increase work efficiency

Product Message

*Name

Phone

*E-mail

*Content

Activated carbon sintered plastic filter rod for food and beverage

Product Parameter

Product Details

Product Applications