An important and storage maintenance - folded filter 【 3 m filter.

Folding filter core, its main filter material: stainless steel wire mesh, sintered wire mesh, polypropylene, hydrophobic ptfe, hydrophilic ptfe, polyether sulfone, nylon, etc. , most of the raw materials imported from abroad. Folding filter core main features: high interception rate, high flow, low pressure difference and a wide range of chemical compatibility; Adopting unique hot melt welding processing technology, production process without any adhesive, no foreign body release. Meet the food, beverage, beer, chemical, pharmaceutical and other industries the production requirements.

in the filter medium, center, the end cover for intercourse, to ensure the sealing ability is better. And one more thing is our concern. Since it is using a folding design, provides a larger filter area, so as to prolong service life. Greatly reduced the change frequency, for the enterprise to save a lot of cost.

folding filter maintenance method cannot satisfy the design discharge filter used to ( Differential pressure gauge in 0 before and after flow decreased obviously. 1MPa) Please stop and open the filter from the filter to remove the filter, rinse the surface of stolen goods, and then in the first 4% of hydrochloric acid soaking for 24 hours, and then soaked in 4% sodium hydroxide for 24 hours, after rinse ( Soak off when two o-rings, to prevent inflation) 。

storage methods:

1 will filter soaked in disinfectant, the stainless steel filter shell filled with disinfectant.

2 filter out to dry, 50 oc 36 hours)

3 will filter out to dry, in dry areas.

4 not dry filter please don't use plastic bags to prevent mildew. How filtering equipment maintenance of diesel engine air filter single-phase energy saving pumping unit maintenance of common failures and elimination method of engineering machinery fault prevention worm gear reducer common fault causes and solution of diesel fuel injection pump failure causes and elimination method