Big flux filter encyclopedia

big flux filter encyclopedia

flux filter is also called big flux folded filter, big flow filter, brands are common; 3 m large flux filter, parker big flux filter, large flux PALL filter, Ryan rich big flux filter, etc. , are the domestic large flux technology has very mature, there are a lot of big flux filter replacement, lower cost, higher cost performance, under the small butterfly with everyone here to discuss the details of big flux filtration core! Definition of

big flux filter water treatment at home and abroad flow filtration, interchangeable PALL, 3 m and other imported brands big flow filter and the filter size, one open folded filter, flow from inner to outer, high velocity folded filter ensures the long life and high capacity, low cost of filtering and stable flow velocity. To reduce the danger of leakage, ensure the quality of filter. Simple design, convenient to install and move, reduce the cost of human when replacement filter, to ensure safety.

using proprietary compound filter material, quality guarantee, performance guarantee, guarantee service life

the highest operating pressure 3 main specifications. 5 kg/cm2

the highest operating temperature 80 ℃

suggested 50 m3 / hr flow

the material PP polypropylene diameter 6 inches ( 152. 4毫米)

length 40 inches ( 1016mm） , 60 inches ( 1524mm） Optional

1 micron accuracy level, 5 microns, 10 microns, 15 microns, 20 microns, 25 micron, 30 microns, 40 microns, 50 microns

seal material E - such as level Epdm, N - Buna, S - Silicone resin, V - Fluorine rubber, T - PFA sealing characteristics of fluorine rubber

high traffic means using less number of filter, reduce labor and operating costs;

high traffic means to use a smaller size of the filter shell, lower investment costs, save area;

filter replacement more rapid, simple and safe

O ring to make sure the filter and reliable;

hot melt adhesive polypropylene material can prevent particle release and discharge, this is different from ordinary wire wound filter;

folding surface design makes the high flow pressure drop of filter are lower than those of other filter, long service life;

in the form of a shell can be vertical, save a space, flow can reach 70 t/h, at the same time that water can go in parallel way,;

the level of housing design makes filter replacement is quite simple

container has a slight tilt, can prevent the liquid leakage when open the lid.

built-in o-rings better seal the lid of the

the top is flush, easy to filter replacement

in the filter Settings below inlet connection, can prevent the impact of the media

in accordance with ASME standard and pressure number to ensure complete real application range

power plant water, drinking water, pharmaceutical sterile water, condensed water equipment, oil field water injection Wells, industrial workshop, high temperature in the use of water, drink juice wine, fuel oil, acid and alkali corrosive liquid, paint coating, chemical solvents, with liquid slurry liquid, glue, ink, imaging and other liquid medium front and terminal filter.

more big flux filter information, welcome to contact us! Url WWW.