block sintered powder ss filter supplier for industry

Company Advantages
1. Lvyuan ss sintered filter cartridge is made of materials that are all meet the food grade standard. The raw materials sourced are BPA-free and will not release harmful substances under high temperature. The graded gradient design helps it to avoid rapid clogging
2. Guangzhou Lvyuan Water Purification Equipment Co., Ltd. has strong technical strength and a strong management team. With a large number of tapered fixing holes inside, it has a high dirt holding capacity
3. This product is corrosion resistant. It has been tested in salt fog harsh environment to determine its resistance to the effects of a salt atmosphere. It is suitable to use with aqueous and organic solvent samples due to its broad chemical compatibility

Lvyuan produces wide ranges of sintered porous plastic filter products, including porous PE, HDPE, PTFE, PVDF, PA, Nylon 6, with shapes of tube, rod, candle, sheet etc. With various filtration rate, shapes and features, sintered porous plastic filter cartridges are widely used in water treatment, chemical engineering, medical treatment, automobile, environmental protection and other industries, such as oil water separator and silencer, drunk driving tester, blind plug for medial treatment, syrup and grease filter device, anti-explosion slices for industrial battery, acid-proof slices for automobile battery, waste water treatment, water purification filter system and more.

◆◆ Lvyuan sintered porous platics filters can meet requirements of different customers. Custom molded Shapes are available.

PE and HDPE Sintered filter cartridge：
Sintered Porous Polyethylene (PE) products are the most commonly used plastic filter element in the world. Porous PE plastics is strong, lightweight thermoplastic with strong chemical (acids and alkali) resistance and wide micron rates from 1 to 200um. There’re Ultra-high molecular weight Polyethylene (UHMWPE) and High-density Polyethylene (HDPE) available in tubes, sheets, rods and molded shapes available for different applications.

PTFE Sintered filter cartridge:
Micro Porous PTFE filter elements are produced by sintering pure PTFE (Polytetrafluoroethylene) granules, no other substances are used in the construction. These filter elements are usually offered when only 100% pure disposable PTFE can be used. The advantage of PTFE is a higher maximum temperature, up to 200℃, and somewhat better chemical resistance. These filter elements should be ultrasonically cleaned to give best results.

PVDF Sintered filter cartridge:
Sintered porous PVDF (Polyvinylidene fluoride) products are good choices when expose to harsh thermal, ultraviolet, ozone and chemical conditions. Porous PVDF prdoucts is extreme hard and with average pore size of 25 micron. It can work in temperature from -62 to 149℃.

PA/Nylon Sintered filter cartridge:
Nylon, trade name for polyamides (PA), is a semi-crystaline polymer that contains amine and carbonyl groups. There’re numerous versions. Nylon/PA has high strength and thermal resistance with a softening termperature of 190℃. Working temperature from -40℃ to 121℃, sintered PA/Nylon porous products have very high tensile strength, good abrasion and chemical resistance, and low coefficient of friction.

Product Feature

◪ High porosity (60%) to ensure a greater flow per unit area;
◪ Smooth outer surface, impurities are not easy adhesion, back washing easy and thorough;
◪ Anti-fouling ability: the small size of the filter so that impurities can’t be retained in the filter body;
◪ Resistance to strong acid, alkali corrosion, resistance to organic solvents;
◪ Excellent mechanical properties;
◪ No particle release.
◪ Product range and wide scope of application

Product Parameter

Fiter Cartridge dimensions
Regular size (mm)	31x12x1000, 31x20x1000, 38x20x1000, 38x18x1000, 38x20x1200, 38x20x1300, 38x20x150, 38x20x400, 38x20x250, 38x20x200, 38x20x180, 38x20x150, 50x20x1000, 50x31x1000, 50x38x1000, 65x31x1000, 65x38x1000, 64x44x1000, 78x62x750mm, etc.
Other dimensions	Customized by customer’s request.
Material of constructions
Filter media option	PE, HDPE, PTFE, PVDF, PA/Nylon etc
Connector type	Flat, Insert type, Thread type, Fin
End caps	PP, M36, M30, M25, M22, M14, M12, or as request.
Performance
Removal rate	0.3, 0.45, 1, 3, 5, 10,20, 30, 40, 50 μm
Maximum Operating Temperature	≦ 82 ℃
Maximum Operating Pressure	6.0bar

Product Details

block sintered powder ss filter supplier for industry-2

part.1

Double open end or single open end

block sintered powder ss filter supplier for industry-3

part.2

Welded with screw cap

block sintered powder ss filter supplier for industry-4

part.3

Various dimension

block sintered powder ss filter supplier for industry-5

part.4

Various design according to your drawing

Product Applications

block sintered powder ss filter supplier for industry-6

Pharmaceutical and medical

block sintered powder ss filter supplier for industry-7

Air and gas purification

block sintered powder ss filter supplier for industry-8

Oil and gas filtration

block sintered powder ss filter supplier for industry-9

Chemical industry

block sintered powder ss filter supplier for industry-10

Water Treatment

block sintered powder ss filter supplier for industry-11

Machinery and Pneumatics

Company Features
1. We own a highly professional QC team in our manufacturing factory. They utilize various kinds of testing devices to ensure the highest level of product and comply fully with industry guidelines.
2. We value environmental sustainability in our business. We have made sustainable business strategies that foster restorative and regenerative design, and aim to keep products and materials at their highest utility and value at all times.

m******r

Our Lvyuan sintered powder ss filter is made to meet the highest quality standards. It is manufactured in high efficiency which is backed by 13+ year experience

i******w

Lvyuan ss sintered filter cartridge is manufactured using quality proven materials. It has the advantages of reasonable price, good stability, and high safety

j******g

Lvyuan sintered powder ss filter is fabricated using quality assured raw material. The product is involved in our cooperation with numerous well-known brands

u******o

Lvyuan ss sintered filter cartridge is made of materials that are purchased from dependable and certified suppliers. The product is updated frequently to ensure that it leads the market trend

i******p

Lvyuan sintered powder ss filter is made by adopting international advanced technologies. It is highly spoken of by battery retailers and agents at home and abroad

a******f

The product is distinguished by earthquake resistance. Made of heavy-duty materials and designed with strong construction, it can resist any form of sharp vibrations. Its research and development is carried out by 3 companies combined to be CTECHi Group

Product Message

*Name

Phone

*E-mail

*Content