Correct maintenance of the filter, increasing the use of time

After a lot of consumer is buying a filter, for maintenance of the filter is not very understanding, so after using for a long time, often makes the filter performance is greatly reduced, so for consumers to know the maintenance method of the filter is very important.

but different filter equipment needed is different because the performance, usage and maintenance method is different also, let below small make up a simple introduce for everybody.

a, early efficient filter

1, the core part of the filter is the filter core, the filter consists of filter boxes and stainless steel wire mesh, stainless steel wire mesh is appropriate damage parts, so consumers in the course of everyday use must be special protection for the filter;

2, after a period of time when filters work, impurities in a certain filter core, the pressure drop increases, the velocity drops, shall promptly remove the impurities in the filter core;

3, clean the impurities, pay special attention to the stainless steel wire mesh on the filter element cannot deformation or damage, otherwise, again installed filters, the purity of the filtered medium can not meet the design requirements, compressor, pump, instruments and other equipment will be destroyed;

4, if discover, stainless steel wire mesh deformation or damage should be replaced immediately.

2, sintering filter precision

1, the precision filter is the core part of the filter, filter core is made up of special material, belongs to the appropriate loss, need special protection;

2, when the precision filter work after a period of time, filter filter to block a load of a certain amount of impurities, the pressure drop increases, the velocity will decline, need to remove the impurities in the filter in time, at the same time to clean the filter element;

3, remove impurities, in particular attention to the precision filter, deformation or damage, otherwise, put up the filter, the purity of the filtered medium can not meet the design requirements;

4, some precision filter, cannot be used repeatedly, such as bag filter, pp filter, etc. ;

5, if discover filter deformation or damage, should be replaced immediately.

for consumers to understand maintenance methods of the filter is very important, because only the correct understanding of the above methods, to make the use time of equipment greatly increase, also can let the consumer health to get the biggest safeguard, different filters have different maintenance methods, just above the two kinds of filter maintenance methods are simple, consumers also need by querying, obtain other product maintenance method. Filter the source water treatment technology co. , LTD. To serve you.