Correct replacement process of pp meltblown filter element

Correct replacement process of pp meltblown filter element The filter element has a certain service life. If the filter element that reaches the waste edge is not replaced in time, the expected effect will not be achieved. The use of PP meltblown filter elements is the same. The following editor would like to share with you the replacement process of PP meltblown filter element. Let's have a simple understanding! 1. After receiving the instruction to replace the meltblown filter element, confirm that the system has stopped running. 2. Prepare suitable PP meltblown filter element (specification, material, size, gasket, model, etc.), disassembly tools, etc. 3. Clean the housing of the filter element, clean the surrounding filter element, stay in the operation area, and wear protective equipment. 4. Disconnect the filter from the system that requires replacement of the PP meltblown filter element. Slowly open the filter top vent to relieve pressure. Pay attention to safety during the production process to prevent material or liquid from splashing; 5. Empty the material in the filter element, open the filter element cover with a tool, remove the large-fat melt-blown filter element, and put the filter element in a plastic bag for cleaning or scrapping. 6. Clean the inside of the filter with a cleaning tool and a rag and install a clean filter element. 7. Open the plastic bag at the open end of the filter and check that the gasket is in good condition and in place. 8. Install the incoming material from the outside of the filter element and from the inside of the filter element. 9. Wet seal gasket and filter socket seat with a suitable wetting agent (e.g. water), place one end of the filter element close to the gasket, vertically, and insert fully into the socket of the cartridge filter socket. Seat, insert filter element, pack filter element into bag, then use tool to install filter cover and tighten filter. 10. Close the drain port of the filter, open the exhaust valve on the top of the housing, slightly open the intake valve, and let the material enter the housing until the liquid overflows from the vent valve on the top of the housing. At this point, close the exhaust valve and carefully check the disassembly site for leaks. 11. Slowly open the filter outlet valve until it is fully open. 12. Remove the tool to be replaced and the cleaning tool. clean perimeter.
Clouds of water filter cartridges failures surround the world of industrial filters manufacturer in particular, simply because people don’t pay as much attention to the water filter cartridges supplier as they should do.
Guangzhou Lvyuan Water Purification Equipment Co., Ltd. aligns itself with customers as partners to assist them in achieving their goals and objectives.
With the market analysts, exports from Guangzhou Lvyuan Water Purification Equipment Co., Ltd. facilities in China will surpass the forecast.
Many homeowners find that they can cut costs while keeping home cool efficiently with .
The stability of the system, controllability of the filter cartridge supplier process, and mobility of the machines provide with a flexible and reliable water filter cartridges supplier system.