Guangdong dongguan fine filter cartridge manufacturer rear activated carbon filter to replace the eight steps'

Guangdong dongguan rear fine activated carbon filter cartridge manufacturer with high quality and good fruit shell charcoal and activated carbon filter coal activated carbon as raw material, supplemented by consumption level adhesive, using high-tech technology, through special process, it combines the adsorption and filtration, intercept, catalysis, can effectively remove the organic matter, residual chlorine and other radioactive substances in the water, and the effect of decoloring, odor removal. Recommend replacing period of 12 months.

1, before the change, the first thing to close the electroplating ball valve, flush button wait ten minutes, let the system automatically reduce stress.

2, by hand or tool to unscrew the nut on the membrane shells the right joint, pull out the pipe.

3, close the ball valve, pressure barrels for hand or tool to unscrew the top of the nut joint, and tap into an empty barrels or sink.

4, use hand tight reverse osmosis membrane tube, again with forceps ( Or special tools) Clamp the old reverse osmosis membrane, it pulled up outside the membrane shells. Open a new reverse osmosis membrane envelope, to remove it.

5, the new kaifeng reverse osmosis membrane into reverse osmosis membrane tube, until there are two small black 'O' type circle at one end of the top to the bottom of the membrane shell; Turn to membrane shell cover in the opposite direction, the membrane shell cover and tighten.

6, into the pipe, and tighten the coupling nut. But don't forget the pipes, fast connection-peg except, of course.

7, open the electroplating ball valve. Let the machine run more than two hours, after normal water making system into the state, to connect the pipes and pressure barrels of ball valve and ball valve opening pressure barrel.

8, in the completion of testing the waters, turn on the tap, active filter, water for 10 minutes, at the same time observation, filter water seepage, leakage, if no water seepage leakage phenomenon, can use water for 10 minutes.