How to change the PP filter1

how to replace PP filters

PP filter is a kind of commonly used in water treatment filter filter, PP filter of the normal service life is about 3 - 6 months ( 3600 l water) , of course, each local water quality and use situation is different, life is not the same, this is not the only criterion, when we found that the effluent water quality is worse than ever before, poor taste. After water flow is significantly reduced, then we will check the filter element or the membrane element clogging problem happened. When the filter on the outer surface is covered by sludge impurities, lead to serious color filter. In the event of filter clogging, this will lead to water purifier can't have the water out. When the above condition, we will change the filter. When know to replace the filter element, how do we change?

water purifier filter replacement installation

1, close the PE tee fill valve

2, with packing in plastic wrench of the bottom of the nose filter according to clockwise ( Like twist screws) , you can remove the

3, the new filter press counterclockwise, can be replaced.

4, completed, turn on the tap, active filter, water for 10 minutes, at the same time observation, filter water seepage, leakage, if no water seepage leakage phenomenon, can use water for 10 minutes.

PP filter replacement diagram

change note

1, replacement, be sure to close the inlet ball valve switch

2, ready to replace the tools ( Wrench, ribbons, connectors, etc. )

3, filter packaging film must be removed to filter must be put in place the

4, filter bottle twist in place, ensure no leakage

5, recovering waste filter note

more information about PP filters, welcome to contact us! > > >