How to efficient use of pp melt-blown cartridge?

At work, how to efficiently use the product is every enterprise to consider the problem, only use the product more efficiently, to the role of play a bigger role in a limited time.

so, pp melt-blown filter the effective use of time what is method?

a change, don't easily to use water, we usually choose water are fixed.

2, improving the running effect of pretreatment and optimization of flocculant and coagulant aid dosage, choose the scale inhibitor for water, adjust the pretreatment equipment to achieve ideal running status, operational procedures in strict accordance with the requirements, ensure the pretreatment effluent is qualified.

3, choose quality guaranteed filter, can not only extend the cycle of the filtering, and can ensure the filter effluent water quality.

use pp melt-blown cartridge notice:

1, when the filter element fixed in the center of the frame, on both ends of the dividers should reveal about 3 - on both sides of the filter material 5mm。

2, division plate end face for 5 - shrink into the framework 10毫米( According to the different protection network installation requirements) 。 A partition should be parallel to the centerline of the framework, a partition and the center line of the tilt error is not more than 6 mm, and does not produce deviation of idiopathic deformation.

3, liao corrugated texture traces and a partition should be perpendicular to the upper and lower end plate of the frame, either a partition and any folding filter material for the frame of vertical degree are no more than 10 mm.