Instead of 3 m microporous folded filter to be replaced?

For 3 m microporous folded filter, change the way it is a need to pay attention to, there are two main way of change, respectively is a filter disinfection sterilization ways and folded filter in and out of the flow to the identification of these two approaches.

body 6 inches in diameter, single side openings, fluid direction by outside introversion, external structure using reinforced polypropylene ( PP) Skeleton, filter layer with polypropylene microporous membrane filter structure, carrying quantity is big, long service life.

cover and filter all adopt the hot melt welding technology, stable structure, can be applied to various fields.

mode, a filter disinfection sterilization.

make full use of disinfection cabinet disinfection sterilization, will filter out from the plastic bags, placed in disinfection cabinet disinfection sterilization thirty minutes under 121 ℃.

is not sealed, disinfection sterilization, a filter installed in the correct manner within the filter ( Fixed plate and the filter element 0 apart. 5毫米) , steam for 30 minutes.

2, fold filter in and out of the flow identification.

folded filter in general are outside pressure, the water by the filter element inside out, outside is recoil according to different direction.

microporous folded filter membrane as the core part of the film folding filter, confirm the membrane filter material, the polypropylene without weaving ( Network) After folding, points as a guide and support, insert the center pipe, into a shell, each position are taking no hot melt welding technology of adhesive, sealing of complete integrated filter core, no chemical pollutants, products adopt high integrity test.