Lvyuan Filter-Industrial Water Filter Cartridge & Housing Manufacturer Since 2009.
Lvyuan sintered stainless steel filter rod for sea water desalination4
1. Lvyuan sintered stainless steel filter has been strictly tested. It has passed through the environmental testing for humidity, vibration, susceptibility, drop, bump and shock. It can provide accurate analysis and results for sensitive ion chromatography applications
2. Guangzhou Lvyuan Water Purification Equipment Co., Ltd. has renewed their ideas for sintered stainless steel filter and promoted independence research ability over the years. Being thermally welded, its caps are not prone to crack or fall off
3. The product runs stably during operation. It has the desired dynamic balance no matter in the movement of spinning or lifting up. It does not secrete dissoluble material during operation
4. The product has the expected repeatability. It can return to the same location multiple times under the same conditions. The star-shaped ring seal makes the filter element easy to disassemble and maintain
5. The product features good heat dissipation. Its vents promote front-to-back airflow and keep it stay cool, which contributes to its smooth operation. Its unique density gradient construction maximizes efficiency and minimizes pressure drop
◆◆ Lvyuan sintered porous platics filters can meet requirements of different customers. Custom molded Shapes are available.
PE and HDPE Sintered filter cartridge：
Sintered Porous Polyethylene (PE) products are the most commonly used plastic filter element in the world. Porous PE plastics is strong, lightweight thermoplastic with strong chemical (acids and alkali) resistance and wide micron rates from 1 to 200um. There’re Ultra-high molecular weight Polyethylene (UHMWPE) and High-density Polyethylene (HDPE) available in tubes, sheets, rods and molded shapes available for different applications.
PTFE Sintered filter cartridge:
Micro Porous PTFE filter elements are produced by sintering pure PTFE (Polytetrafluoroethylene) granules, no other substances are used in the construction. These filter elements are usually offered when only 100% pure disposable PTFE can be used. The advantage of PTFE is a higher maximum temperature, up to 200℃, and somewhat better chemical resistance. These filter elements should be ultrasonically cleaned to give best results.
PVDF Sintered filter cartridge:
Sintered porous PVDF (Polyvinylidene fluoride) products are good choices when expose to harsh thermal, ultraviolet, ozone and chemical conditions. Porous PVDF prdoucts is extreme hard and with average pore size of 25 micron. It can work in temperature from -62 to 149℃.
PA/Nylon Sintered filter cartridge:
Nylon, trade name for polyamides (PA), is a semi-crystaline polymer that contains amine and carbonyl groups. There’re numerous versions. Nylon/PA has high strength and thermal resistance with a softening termperature of 190℃. Working temperature from -40℃ to 121℃, sintered PA/Nylon porous products have very high tensile strength, good abrasion and chemical resistance, and low coefficient of friction.
Product Feature
◪ High porosity (60%) to ensure a greater flow per unit area;
◪ Smooth outer surface, impurities are not easy adhesion, back washing easy and thorough;
◪ Anti-fouling ability: the small size of the filter so that impurities can’t be retained in the filter body;
◪ Resistance to strong acid, alkali corrosion, resistance to organic solvents;
◪ Excellent mechanical properties;
◪ No particle release.
◪ Product range and wide scope of application
Product Parameter
| Fiter Cartridge dimensions | |
| Regular size (mm) | 31x12x1000, 31x20x1000, 38x20x1000, 38x18x1000, 38x20x1200, 38x20x1300, 38x20x150, 38x20x400, 38x20x250, 38x20x200, 38x20x180, 38x20x150, 50x20x1000, 50x31x1000, 50x38x1000, 65x31x1000, 65x38x1000, 64x44x1000, 78x62x750mm, etc. |
| Other dimensions | Customized by customer’s request. |
| Material of constructions | |
| Filter media option | PE, HDPE, PTFE, PVDF, PA/Nylon etc |
| Connector type | Flat, Insert type, Thread type, Fin |
| End caps | PP, M36, M30, M25, M22, M14, M12, or as request. |
| Performance | |
| Removal rate | 0.3, 0.45, 1, 3, 5, 10,20, 30, 40, 50 μm |
| Maximum Operating Temperature | ≦ 82 ℃ |
| Maximum Operating Pressure | 6.0bar |
Product Details
Product Applications
Company Features
1. Guangzhou Lvyuan Water Purification Equipment Co., Ltd. has a wealth of sintered stainless steel filter experience and is committed to providing the highest quality products. Our factory has a number of automated or semi-automated production lines capable of handling large production yield needs. These lines are fully flexible to gear different production adjustments.
2. We boast a pool of elites. They have a deep understanding and abundant expertise about the products. This enables them to customize and develop and most suitable products for customers.
3. Our company has received a number of prestigious awards voted by clients. In an age when manufacturing service is more and more demanding, it’s fantastic to be appreciated and supported by our clients. We are full of confidence in our quality sintered carbon water filter . Ask!
Quick link
Products
Stainless Steel Filter Housing
Sediment Filter
Sintered Metal Filters
Melt Blown Filter Cartridge
High Flow Filter Cartridge
Pleated Filter Cartridge
Sintered Filter Cartridge
Sintered Porous Plastic
Pipette Tips
Medical Filters
Contact Us
About us
Our Lvyuan Fliter always insists on product quality is life, our aim is to provide more professional and attentive cartridge filter, filter housing and services for our global customers.
+86 15975359293