Main performance factors and maintenance overview of oil and gas separation filter elements

The technical principle of oil and gas separation filter element is to remove dust, oil and gas particles and liquid substances in the air. The oil and gas filter element separates, traps and aggregates the oil mist in the gas, and the oil droplets formed at the bottom of the filter element are returned to the compressor system. 1. Installation and maintenance When the pressure difference is reached, the pp filter element of the oil and gas separator must be replaced. When installing or replacing the filter element, care must be taken to ensure that the conditions are correct. When installing and replacing the filter element, it is important to ensure that the dry side of the oil and oil filter element in the separation tank is clean, and the surface of the filter element separation layer is easy to operate, so that the oil carrying capacity is increased, the efficiency is reduced, and the dry side of the filter element is blocked by impurities. oil pipeline, resulting in the phenomenon of gas with oil. The failure pressure difference of the filter element design is 4bar, so after the air compressor is boosted, the calculation valve should be gradually opened until it reaches the demand of the load gas consumption. Carry a lot of oil. The use of the oil and gas separation pp filter element beyond the design flow rate range will inevitably increase the oil carrying capacity. 2. Some measures to prolong the working life Correct management of oil is the key to determining the working life of the oil and gas separation filter element. The working life is only mainly limited by the solid particles deposited in the fine separation layer, and the result is an increase in the pressure difference. Usually replace the air filter and oil filter on time and keep changing the oil at a certain time interval, which can limit the dirt entering the oil circulation loop, so as to reduce the dirt entering the oil and gas separator, which can be directly extended. The working life of the Pall filter element in the oil separator pall. In addition, the selection of oil is also very important. Only the identified oil with anti-aging and water sensitivity should be used. The unsuitable oil with insufficient oxidation resistance will form a jelly-like oil after a relatively short period of operation. The residues will clog the filter element, and the higher working test will also accelerate the aging of the oil. Third, the main performance indicators of the Pall filter element The key performance indicators of the water treatment filter element lie in its water treatment efficiency, volume size, service life, high temperature resistance, oil removal and purification effect, pressure difference strength, ease of operation and so on.

Over the years, has become very popular as more and more people are trying it out.

Guangzhou Lvyuan Water Purification Equipment Co., Ltd. humbly request you to try this item in your centers and we assure you that you would be in a great pleasure with the results.

Guangzhou Lvyuan Water Purification Equipment Co., Ltd. have found that nurturing relationships with clients by welcoming them to our factory can be valuable to all parties.