Oil and gas separation filter step 5 steps

Oil and gas separation filter element for filtering compressed oil droplets in the air. Particles directly blocked by filtering material, and through the spread of the filtering material and produce inertia collision mechanism of condensation energy, so that the compressed oil particles suspended in the air condenses into lard drops rapidly. Under the effect of this, the oil accumulation in the bottom of the oil separator, and through the bottom of the back in the groove of the tubing entry to return to the lubricating oil system of the nose, so that no oil compressed air compressor ruled out. 1. Release the barrels of oil and gas and the pressure in the pipeline, and dismantling of all pipes connected to the barrels of oil and gas glands; 2. Remove the oil and gas drum gland bolts, remove the oil and gas drum gland, and remove the oil and gas separator. 3. Clean head cover and barrel body between the sealing surface, be careful not to let the impurities fall into the barrel; 4. The new oil and gas separation filter and paste on the sealing washer carefully inserted into the barrel, don't collide with the gun. 5. Remounted gland, pipeline installation, to the bottom of the tubing shall be inserted into the oil and gas separation core, otherwise it will affect the oil return and run out of oil.