Printing and dyeing textile industrial water treatment equipment

Printing and dyeing water has the characteristics of high water consumption, the provisions of the state now control the tap water consumption of the enterprise, to control the amount of water in water is not enough large textile printing and dyeing enterprises of water, and tap water is not treated, also could not reach the water quality of textile printing and dyeing water requirements.

in shaoxing, a unit will encounter such a situation, boss is very upset, also good in shaoxing, zhejiang region is not lack of water, river, before and after the factory has 2 channel, and is convenient for water, but water cannot meet their water standards, how to do?

after receiving this information, the company quickly sent people to inspect the scene, shaoxing tested water turbidity reached 10 ntu, high suspended solids of 50 mg/L, also not low hardness, through the analysis of water quality, we use the dosing device + quartz sand filter, softening device, dosing device adopts the metering pumps dosing flocculants PAC, the tiny particles flocculated condensed particles, and then through the quartz sand filter filter processing, so that the water quality is relatively clean, finally, go out to the calcium and magnesium ions in the water softener, water softener in U. S. fleck brand control valves and control timing automatic regeneration, just add more salt to salt box.

the practice proved that the set of water purification equipment, water quality is very good, the customer to produce the fabrics of bright color and soft. The user is very satisfied.