Pure water machine, activated carbon filter structure

According to statistics, the urban surface water polluted by different degree, with more attention paid to the drinking water health, water after chloride purification, although can kill bacteria, but can't remove all kinds of organic and inorganic residue in water, on the market the pure water machine using granular activated carbon as adsorption filter medium in a certain extent, improve the water quality, but the low filtration efficiency, easy leakage, short service life of pressure seal structure, single function, such as faults, it is hard to meet the needs of different water quality purification, the small make up will take you to know the structure of pure water machine activated carbon filter. Silver activated carbon micro filter tubes of the main body is composed of inner and outer, inner layer of dense small pore structure, the outer layer of loose big pore structure, with a layer of non-woven, non-woven fabric wrapped on polypropylene porous elastic-plastic network, on the end cover and lower cover by hot melt adhesive on the activated carbon microporous tube body, filter through the sealing ring and water filter base on lower cover plug seal. Compared with the existing structure of activated carbon filter, filter density can increase step by step, and its excellent filter absorption of different size particles, impurities, organic compounds, such as peculiar smell, high filtration precision, carrying capacity is strong. Surface adsorption to become the overall adsorption, make full use of the material adsorption ability, extend the service life; Water medium filter can be added a variety of functions, meet the needs of the various water treatment; Using plug-in sealing structure, sealing effect is good, not easy leakage, flexible use, easy to change. Activated carbon microporous tube body composed of polyethylene with silver activated carbon blending, its structure is divided into two layers inside and outside, inside the aperture of 1 - Aperture of 10-10 microns 50 microns, the outer surface of the activated carbon microporous tube body covered with a layer of non-woven, non-woven fabric for polymers, using acrylic materials, thickness of 0. 1 - 2. 0MM。