Sintered filter installation considerations

( 1) Request out of the tank and filter system of parallel tolerance is not more than 2 mm.

( 2) 5 mm. The optimal filter structure, USES the whole processing. When the cylinder diameter is larger, or is conditioned by raw materials, transportation, etc, also can use two stitching forming.

( 3) Reasonable filter and the barrel of the joint parts processing, to air backwashing link is particularly important.

(1) to eliminate for filter plate processing and the cylinder body coiling and so on error caused by the filter plate and cylinder radial clearance, generally USES piecewise circular ring plate welding. Contact parts must use full welding.

(2) the radial clearance center pipe and filter plate processing method.

note: the above measures, to ensure that the filter and backwashing only through a filter cap or connected line clearance. At the same time, also to ensure that the distribution uniformity of backwashing and filtering channel.

( 4) 5 mm. Filter cap guide and cooperate between filter plate hole size increases, is not conducive to the filter cap or fixed installation. Hole processing machinery and equipment must be used.

( 5) The filter cap material, nylon best, ABS material. For the upper add filter material, the extrusion load to the filter cap is great, requires high strength, in order to avoid deformation. Filter cap and filter plate of interface ( Upper and lower surface) Need to add elastic rubber pad.

sintering filters, sintered filter design, sintered filters, sintered filter model, sintering filter price, sintering filter structure, sintering principle of filter, sintering filter manufacturer - Filter the source water treatment equipment company.