◪ Uniform structure, narrow pore size distribution, and high separation efficiency.
◪ High porosity, the resistance of filtration less, and the penetration efficiency is high.
◪ High temperature resistant, it can be normally used below in 280 degree.
◪ Good chemical stability, acid & alkali corrosion resistance, and oxidation resistance.
◪ No particles fall off, it will not make the concentrate form secondary pollution, it conforms to be food hygiene and pharmaceutical GMP requirements.
◪ Good mechanical performance, it can have the suction filtration and press-filtration, simple operation.
◪ Low differential pressure, the area of cover is small, and large water flow rate;od mechanical performance, it can have the suction filtration and press-filtration, simple operation.
◪ Strong antimicrobial ability, no microbes.
◪ The finished-products technology is good, the overlength of overall length can be reached to 1000mm.
◪ It can be on-line regeneration, easy to clean, and long service life.
|Fiter Cartridge dimensions|
|Length||5’’ (125mm), 10’’ (250mm), 20’’ (500mm), 30’’ (750mm), 40’’ (1000mm）|
|Diameter||Ø22, 30, 50, 60, 70, 80, 100, 120mm|
|Other dimensions||Customized by customer’s request.|
|Material of constructions|
|Connector type||Flat, Insert type, Thread type, Fin|
|End caps||DOE, 215, 222, 226, M20, M30, M42 or as request.|
|Sealing material||Silicone, NBR, EPDM, Fluoro rubber, etc|
|Removal rate||0.1, 0.45, 1, 3, 5, 10,20, 30, 40, 50, 100um|
|Temperature Tolerance||≦ 300℃ wet|
|Permeability||0.02-20L/cm2 min Pa|
|Maximum Operating Pressure differential||6.0 bar|
|Flow rate (L/H)||180, 200, 250, 280, 300, 350, 500, 800, 1000, 1500, 1600|
◆◆Pure water flow rate reference table: the initial value of 10'' sintered titanium cartridge (P=0.2 MPa, 1cP, 25℃)
|Micron rate (μm)||0.2||0.45||1||2||3||5||10||20||30|
|Flow rate (L/H)||180||200||250||280||300||350||500||800||1000|
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.