Specification of wire wound filter element used in power plant

Power plant uses wirewound filter element specifications Power plant uses wirewound filter element material Absorbent cotton filter element form Wirewound filter element Purpose Gas-liquid filtration Applicable scope of filter Applicable object Water brand Kangyuan specifications Various specifications Working temperature 180 (℃) Large working pressure difference 0.4 (mpa) Filtration accuracy 1-50um Import and export diameter 63 (mm) Performance acid resistance, alkali resistance, high temperature resistance, anti-static, other raw water pressure 5 (kg/c㎡) Filtration area 0.5 Wound condensate water treatment filter element PP filter element produced by our company, filter The meta parameters are all controlled by computer, and the lines are arranged uniformly, which can fully guarantee the comprehensive performance of the product. In addition, the use of 304 stainless steel porous support tube, its high strength can fully withstand the instantaneous high pressure impact generated in the process of resin explosion and backwashing , And ensure that the filter element does not deform and the polypropylene fiber material does not fall off, so that the safe operation of the condensate treatment system is guaranteed. Powder resin covered filters and pre-filters are generally used in power plant condensate treatment systems. Filter elements are installed inside the filters. The surface of the filter elements can be coated with fiber powder and anion resin powder to achieve the purpose of filtration and desalination. When the pressure difference between the inlet and outlet of the filter or the conductivity or silicon of the filter outlet water reaches the set value, the filter is in a failure state, the filter will be burst and backwashed, and then the film will be put into operation. Features and specifications of the wound condensate treatment filter element ●Continuous polypropylene fiber thread wound filter element, all filter element parameters are arranged by computer to ensure the comprehensive performance of the product; ●full-length uniform filtration/resin coating filtration; ●all stainless steel Center tube and connecting parts with threaded interface; ●Special design for backwashing operation; ●Full-length high dirt interception capacity; ●Different sizes of filter for powder resin filter/pre-filter for various purposes ●Equipment for installing this filter element has a large output, a small area, and easy layout of the main workshop; ●Simple system, no acid and alkali consumption and pollution of recycled acid and alkali waste, easy disposal of waste, which is beneficial to environmental protection; ●The investment cost is low, and the pressure loss before and after the condensate polishing treatment is small. Item ly-70′ filter element ly-70′a filter element 60′ filter element media polypropylene fiber polypropylene fiber polypropylene fiber center frame material 304 304 304 bottom structure m33×1.5 connecting thread m33×1.5 connecting thread g1′ connecting thread top structure m8 thread m10 thread m6 thread inner diameter φ30mmφ30mmφ35mm outer diameter ф50mmф50mmφ64mm filter accuracy 5μm5μm5μm filter element length 1778mm1780mm1524mm recommended large flow rate 8~9m3/h8~9m3/h8.3 m3/h recommended large differential pressure 2.45kg/cm22.45kg/cm22.45kg/ cm2 high working temperature: 85℃85℃85℃