Take the water as production water is very common now, the river sediment, due to the humus and so is typically used after purification treatment.
in the river sediment is relatively easy to handle, mainly by dosing flocculation, quartz sand filter, bag filter process is about the same, but if the eutrophication of water quality, it is easy to grow algae, algae particles is small, the rich certain viscosity, simply by quartz sand filter, bag filter is difficult to remove, can only remove the part, because by quartz sand filter backwashing, we found a lot of green water, this is the algae, algae, flow meter, water meter of the FRP plate is covered by green algae, and green algae are green, but after boiling, will find water in yellow, this is not completely filter out of algae by boiling will form the yellow substance.
jiangsu changzhou has a user is such, is the lumber mill, need to use steam sterilization, began using quartz sand filter, bag filter, precision filter processing, even boiling water or yellow, algae that not completely eliminate, we gave him a set of ultrafiltration membrane equipment, through the membrane, no processing filter backwash time 2 hours, the water is very clean, clear and transparent, the user is very satisfied.
processing water and untreated water control:


by contrast, clear, we found that the treated water is transparent, without impurities, and untreated water impurities, more transparency is poor.

222 joint degreased cotton winding filter adopts 304 stainless steel skeleton, using degreased cotton according to the PLC programming techniques under the mechanical action around around 304 stainless steel skeleton of the above water filter, because in the process of winding formed from dense to sparse winding that allows the filter precision outer loose inside the structure, this structure can intercept the water more impurities. So as to make the filtration efficiency higher

,
water processing, petrochemical
,
RO reverse osmosis systems, food and pharmaceutical waste water treatment,

the microelectronics industry,


use absorbent cotton string according to the PLC programming techniques under the mechanical action around around 304 stainless steel skeleton of the above water filter
can withstand high pressure filter has a good chemical compatibility
available a variety of material is made to meet the needs of the various kinds of liquid filtration
the structure of the filter aperture in the dense and thin outside, deep has good filtering effect
to intercept more impurities in water, the pressure drop is small, large amount,


a variety of optional material: polypropylene, degreased cotton, chemical fiber etc.
size: 63 - element diameter 28 mm to 115 mm diameter, 30 mm
skeleton material: 304, 316, PP polypropylene etc.



temperature: 80 ℃, 120 ℃ degreased cotton, glass fiber polypropylene 200 ℃
the differential pressure of work: 0. 2Mpa

Website: http://.

inch PP melt water jet cartridge filter


inch PP melt water jet cartridge filter introduction:

the melt-blown filter and melt-blown fine lines and melt-blown grooving. Filter on the surface of deep hole groove structure.
it can be spread in the direction of flow, reduce the flow resistance, at the same time, by way of hot melt molding,
don't add the jehol adhesives.


inch PP melt water jet cartridge filter parameters:

effective filtering suspended in the liquid, particle impurities, such as long life
fiber structure reinforcement, no depilation phenomenon
the superfine fiber, high filtration accuracy:
diameter standard filter mm, mm, non-standard can be
diameter: according to customer's requirement is varied, such as: mm, mm, mm, mm, length:

can also according to customer's requirement: the filter material polypropylene
gasket: nitrile rubber
filtration precision: um, um, um, um, see the customer request


other products: guangzhou filter source water filter co. , LTD.
more folding standard filter
PP line PP skeleton line around the filter element
LFT fell * ceramic filter
PTFE microporous folded filter
fold decline pore membrane filter

For replacing the PALL high-flow filter element, what effect can be achieved by adding chlorine dioxide? What should I pay attention to during the dosing process? The main points about replacing the chlorine dioxide in the PALL high-flow water filter element: the chemical properties of chlorine dioxide are active and easy to decompose, and it is inconvenient to store after production. It must be prepared on-site at the place of use. Therefore, the preparation and dosing equipment is often continuous of. The place where chlorine dioxide is added in water treatment varies depending on the purpose of the addition. If it is mainly for sterilization, it should be added after filtration; if the water distribution system is required to maintain the amount of residual chlorine that kills microorganisms, it is also necessary to add it in the water distribution system; if it is mainly to remove trihalomethanes, it should be added before filtration. Dosing; if manganese removal is required, there should be enough time to precipitate manganese dioxide after dosing; if in order to control the odor and odor, dosing at several points should be dispersed. During the construction and operation of the equipment, special protective measures must be taken, because if chemicals such as hydrochloric acid and sodium chlorite are used improperly, or the concentration of the chlorine dioxide aqueous solution exceeds the specified value, it will cause an explosion. Therefore, the mass concentration of its aqueous solution should not be greater than 6-8g/L, and avoid contact with air. The dosage of chlorine dioxide is related to the quality of the raw water and the purpose of use. It is generally in the range of 0.1~1.5mg/L. It needs to be determined through experiments. In the process of preparing chlorine dioxide, in addition to adjusting the concentration, it can also be changed. Dosing amount to adapt to changes in water quality and quantity.
For the study, researchers defined Lvyuan as strategies to foster some social good, including programs that benefit community engagement, diversity, the environment, human rights and employee relations.
At the heart of water filter cartridges supplier is our Vision to be the global energy company most admired for its people, partnership and performance.
water filter cartridges supplier has a great positive reflects from our dear customers.
Lvyuan focuses on three key elements—process, people, and technology—the authors found that people of two seemingly opposite cultures are able to work together in a project-based environment to complement each other and reap mutual benefits for a win-win result.
Deeper connections between Guangzhou Lvyuan Water Purification Equipment Co., Ltd. and customers can be made when we're thinking out of the box and meeting outside of manufacturing work.