The melt filter when using attention

The melt filter is full metal structure, make up the powder filtration products are fragile, small flow rate, the deficiency of the filter paper, filter cloth is solved the characteristics of heat resistance, pressure, has a very thin stainless steel fiber structure. Is mainly used in high temperature and high pressure, high liquid filtration of harsh environment, service life is longer than the melt filter when use, these things have to pay attention to: 1. The melt filter is better than other filtering element after use, but should pay attention to in the process of cleaning and disassembling don't scratch and touch, hit, fall off wait for a phenomenon, to avoid man-made damage. Ban filter applying pressure appearance in something at once. Usually in the filtrate by filter outgoing filtering, not a inverse filtering. 2. Melt filter in reverse blowing and anti scour, generally with pure gas blow first, back pressure is 1 working pressure. 2 - 1. 3-5 times, each time back moment 4 to 5 seconds, repeat procedures 6 times with clean liquid after backwashing, backwashing 3 - 5 minutes, 2 - 3 operation time. Melt filter source of * * * * * * production filter, water filter, oil filter and filter equipment, has rich experience in production technology, can provide technical support for free, can arrange personnel to the scene of surveying and mapping, if necessary work one-on-one communication, ensure the usability of the products. Welcome to inquire: 18790610805 ( Manager liang)