The purpose of the furnace flue gas purification treatment using activated carbon filter

At the bottom of the furnace flue gas purification treatment and utilization of processing plant has a pool, connection pool and drainage bibcock, washing tank connected to the pool, pool with booster pumps, connecting pipe, the pipe at the other end of the pipe nozzle, the nozzle is located in the washing room, on the under side of the washing room, under water, chassis, bottom-up set filter cotton layer, activated carbon, today small make up furnace flue gas purification treatment will be introduced to the purpose of using activated carbon filter. Water level is higher, after setting the diversion eaves, the nozzle in the guide above the roof, the upper in the washing room is equipped with filter filter room, filter in the filter cartridge indoor, by installing cover is installed on the filter filter chamber, are connected to the exhaust induced air filter filter chamber in a specific path set fan, in the washing room on one side of the filter chamber wall, between the water in the washing room in the warehouse walls and in the upper level, also have doors. Booster pumps and piping layout in the washing chamber, booster pump is in the under side of the filter parts, or booster pumps and piping layout outside the washing tank, one end of the line connected to the booster pump, on the other side from the washing outside lateral extension after thorough washing interior ministry, then connect the nozzle. The utility model of soot washing, absorption, filtration, purification, make the pollutants combine with water or in the flue gas is filter adsorption, make the discharge flue gas does not pollute the air, no pollution, protect the environment.