The rear filter information and use of water purification system

As water purification technology in the family, the application of reverse osmosis membrane filtration has become the mainstream of water purification system, start and stop of water purification systems usually consists of high voltage switch control, water purification system is one of the problems existing in the water can't fast continuous emission, the small make up will take you to understand the use of rear filter and water purification system. Filter is equipped with relative on the bracket and the bracket, the bracket and the stents between filter material, filter material limit with the passage of the filter outlet connected, the walls of the filter material and filter the lining of the limit with the passage of the water inlet connected, therefore, on the bracket and filter in top wall demarcate a water storage chamber, water supply channel to the filter material and water storage chamber at the same time. Has described and filter in the filter cavity connected water storage chamber, make at least some of the pressure water stored in the storage chamber, continuous and stable discharge and water of the water purification system, on the upper bracket setting bridge abutment, bridge abutment is connected to the filter of the inside wall, within the top wall of bridge abutment is connected to the filter. On bearing include floor, ring plate and the lower ring on board, the ring plate and the lower ring plate formed on the upper and lower side of the plate, respectively, on the lower end of the upper annular plate form the outfall, connect to water channel and port.