Water dispenser filter and ultrapure water machine filter replacement method 【 3 m filter.

Due to the people more and more high requirement for drinking water quality, water dispensers and ultrapure water machine can effectively provide healthy water quality. In order to ensure the water quality conforms to the drinking health standards, replace the filter element is key now to ensure water quality. Element changes at the same time need according to the water cooler and ultrapure water machine to take into consideration the raw water quality and use of the time.

water dispenser filter replacement items

1, check the length of the filter, the new filter and the original filter size, to conform to the standard installation, if the filter length is not enough can effectively make use of the method of adding rubber mat.

2, reverse osmosis water machine when installation should pay attention to put the location accuracy. If put top, filter will lead to damage to equipment can not run normally, the final effluent water quality can't accord with standard of health drink.

3, in the filter must be clean before installation, and then in the access to the lower processing system.

4, filter must be regularly cleaned and replaced, its use time according to water quality, general life in the 6 & ndash; 8 months.

ultrapure water machine filter replacement items

1, check the ultrapure water machine filter length: comparing old and new, the length of the filter, if the new filter length less than can be used to increase rubber pad solution. Check the length of the filter element: to compare the old and the new filter length, if the new filter length less than can be used to increase rubber pad solution. Element

2, ultrapure water machine installation should pay attention to put the filter element is, especially the PP is easy to put the partial screw filter bottle by hand to feel, screw is not easy to put the partial dynamic case, screw filter bottle by touch to feel, when you need to put filter when should pay attention to put the filter element is, don't hard twist, put the filter back to unscrew the filter bottle is, so as not to damage the filter.

3, flush the level before they can access after filter installed system, disconnected when cleaning the next level of pipeline, need to open the inlet ball valve can wash, need to open the inlet ball valve can wash and rinse at least 5 minutes, rinse after the access to the lower processing system.

so water treatment filter provides a safe and healthy drinking water for people and the quality of life. Can be widely applied to water dispenser and ultrapure water machine, let people no longer to drinking water problems.