Water purifier filter replacement precautions and disinfection

Disinfection method of water purifier filter element 1 Disinfection in the disinfection cabinet: Take it out of the plastic bag and place it in the disinfection cabinet for half an hour at 121 °C. 2 On-line disinfection: put it in the filter according to the correct method and pass steam for half an hour. The correct use of the filter element can not only improve the efficiency of the filter element and prolong its service life, but also has more prominent advantages; ① It greatly improves the labor efficiency of employees; ② It greatly improves the working conditions of employees; ③ The cleaning quality of the precision filter is significantly improved, and the stability is good; ④ Improved the civilization of the precision filter cleaning site. Performance test of high-efficiency self-cleaning air precision filter element: ①Flow-resistance test: measure the pressure loss of air flow. ②Original filtration efficiency test: the dust collection efficiency of the filter element can be calculated, and the dust reduction rate of the normal filter element should be above 99%. ③ Dust removal ability test and cumulative efficiency test: Too much dust accumulation in the filter element will cause blockage and increase the air intake resistance. 1. Check the length of the filter element: Compare the length of the old and new filter elements. If the length of the new filter element is insufficient, it can be solved by adding a rubber pad. Check the length of the filter element: Compare the length of the old and new filter elements. If the length of the new filter element is insufficient, it can be solved by adding a rubber pad. The rubber pad can be removed from the old filter core) (the rubber pad can be removed from the old filter core) 2. When placing the filter core of the household reverse osmosis pure water machine, pay attention to the correctness of the filter core, especially PP is easy to deviate, When twisting the filter bottle, you should feel it by your hand. It is easy to deviate when you can't twist it. When you twist the filter bottle, you should feel it by your hand. When placing the filter core, pay attention to the filter core. Reposition the filter core to avoid damage to the filter core. The end of the granular activated carbon with the rubber pad is facing up, do not twist it hard, but unscrew the filter bottle and put the filter core again, so as not to damage the filter core. The end of the granular activated carbon with the rubber pad is placed upward, and the direction of water flow is marked on the small T33. The direction of water flow is marked on it. 3. The filter element of the water purifier can be connected to the next-stage system after being rinsed after installation. When flushing, disconnect the pipeline of the next level. Only the ultrafiltration water purifier and the filter element can be connected after being rinsed after installation. In the system of the latter stage, when flushing, disconnect the pipeline of the next stage, and the water inlet ball valve needs to be opened to flush, and the water inlet ball valve needs to be opened for flushing. The flushing time is at least 5 minutes. minutes, and then connected to the lower processing system after flushing. 4. The use time of the filter core depends on the water quality. Generally, it is 6-8 months. PP can be cleaned and used. Preferably no more than 1 year.
water filter cartridges supplier is an inevitable and critical part of being a manufacturer, and it's more complicated than just manufacturing products and serving customers.
Guangzhou Lvyuan Water Purification Equipment Co., Ltd.’s sole aim is to provide exquisite and unheard of features to the concept of producing technology.
water filter cartridges supplier can also provide a new, productive option for business owners, if you're willing to use it.