Water reuse system

water reuse system system adopts three-level purification filtering:

is the first step on the quartz sand filter is mainly used to remove the suspended solids in the water. The device with other water treatment equipment, widely used in water purification, water purification in sewage treatment and other kinds of water treatment engineering.

active carbon filter is mainly used for the adsorption of free chlorine in water ( Adsorption eed %) , also has higher removal rate for organic matter and colority. Is softened, the pretreatment of the desalination system for pure water production equipment. Filter material for activated carbon. Equipment main material for carbon steel corrosion, glass fiber reinforced plastic and stainless steel, etc. A secondary

activated carbon filter is mainly to remove the macromolecular organic matter in the water, colloid, peculiar smell, residual chlorine and other impurities, reduce COD content. Activated carbon filter for vertical structure, material selection of glass fiber reinforced plastic, stainless steel, carbon steel, etc. Normal work, design velocity m/h.

active carbon filter operation is done through carbon bed. Of carbon bed of particles have very many microporous activated carbon and huge specific surface area, strong physical adsorption capacity. In addition, the surface of activated carbon on an amorphous part can have some oxygen, make through carbon bed water was effectively activated carbon adsorption of organic pollutants. This filter is a more commonly used water treatment equipment, it is used as a water treatment desalination pretreatment equipment in the system, can effectively guarantee the level after the equipment service life and improve water quality, pollution prevention, especially to prevent reverse osmosis membrane, after ion exchange resin and so on more than the free oxygen poisoning pollution. Activated carbon filter organic matter in water, colloid, pigment has obvious removal ability, etc. The company has various types of stainless steel, carbon steel lining plastic and glass fiber reinforced plastic selection of activated carbon filter. At the same time also produce other kinds of filters.

active carbon is the most widely used adsorbent, among its lattice organization have various shapes of micro hole, forming the unique porous structure, and therefore a huge adsorption area, so the strong adsorption ability. Adsorption of activated carbon filter USES the method can effectively remove the organic matter in the water, colloid, remove residual chlorine and other bad smell, decrease chroma of the water, are widely used in factories, town water purification, as well as reverse osmosis, ultrafiltration, pretreatment process of ion exchange system and improve the water quality of all kinds of deep purification equipment.

3 PE membrane tube filter using polymer polyethylene filter as main filter material.

characteristics and performance of polymer polyethylene filter:

large flow, high porosity, %) Ensures that the fluid flow per unit area is bigger;

outside surface is smooth, smooth surface, impurity is not easy to stick, easy to reverse flushing;

fight corrupt capability is strong, the large filtration precision in small and makes the impurity cannot be retained in the filter and water content of sludge can be pressed on to %;

the operation condition of the products, such as large flow filtration.

corrosion of strong acid, strong alkali resistance, dissolved organic solvent resistance;

good strength and wearability ensures that its service life;

recoil back easy reuse

good toughness, filter is not easy to fracture;

there is absolutely no threshing phenomenon;

compression capability is strong.