Water softener main characteristics and performance parameters

Commonly used softening water equipment mainly manual type, domestic combined, several kinds of imported multi-way valve type, including import multichannel valve type demineralized water is the main product on the market at present, this kind of equipment to import the multi-way valve and controller as the core, with homebred resin tank, salt box and pipe and Yang resin composition automatic softening water equipment. Tank is divided again for different materials such as glass fiber reinforced plastic, stainless steel and carbon steel, so the price difference is bigger.

demineralized water equipment main features:

demineralized water equipment has extensive adaptability and can satisfy the user's various operating conditions ( Industrial boiler, heat exchange, air conditioning, food, pharmaceutical, electronic industries) And the needs of different water treatment, can provide different flow according to the requirement of the user, different control mode, all kinds of products with different levels of consumption. Thanks to its nearly two kinds of valve body and a dozen of the combination of backwashing and regeneration control, as well as from 3/4 inch to 3 inches of water of pass in and out of different diameter. FLECK demineralized water equipment has extensive adaptability and can satisfy the user's various operating conditions ( Industrial boiler, heat exchange, air conditioning, food, pharmaceutical, electronic industries) And the needs of different water treatment, can provide different flow according to the requirement of the user, different control mode, all kinds of products with different levels of consumption. Thanks to its nearly two kinds of valve body and a dozen of the combination of backwashing and regeneration control, as well as from 3/4 inch to 3 inches of water of pass in and out of different diameter. FLECK efficiently softened water equipment, save work, low failure rate. The operation of the equipment can be the greatest degree of automation. Equipment each pressed parts after the strict O - The cycle of 14 bar pressure test, and the design of the parts as far as possible concise, reduce the fault. Saving water, save electricity, easy to adjust. Equipment and water rate can reach 98%, power consumption is low ( 10 w) , because is equipped with a variety of regeneration control, enables users according to need to adjust the setting the right means of regeneration. Reliable operation, long service life. The design of the valve body are conducted in the condition of optimum hydraulics, and body according to the large and small caliber of import and export, have different material, large diameter all products made of lead free brass this design makes FLECK softened water equipment, has a more stable effluent water quality and the service life of 20 years.

2, technical indicators:

raw water hardness: 3 - 10 mg · N/L

water hardness: 0. 3 mg · N/L

working pressure: 0. 2 - 0. 6MPa。

working temperature: 2 - 50 ° C

tank pressure: 0. 8 mpa

power: 220 v, 50 hz

power consumption:

equipment total pressure loss (10 w Water pipe + controller + cloth) 1 mpa installation requirements, the foundation level, equipment installation area should set drains. Piping installation must be installed on a bypass and the feed line pressure gauge. 2 mpa to pipeline pump. The liquid level is higher than salt, and not your own sulfonic salt or calcium salt for regeneration agent.

automatic softening water equipment characteristics:

water softener can add regeneration with artificial regular salt

effectively remove hard water caused by the element such as calcium, magnesium and soluble iron

equipment to automatic operation, continuous supply of water softening

in the 'flow', 'time'

two mode control recycling according to the raw water hardness

conditions setting, modifying, using parameters, such as automatic detection and display equipment water yield

self-priming regenerative way, adapt to a variety of salt, the salt pond, etc.

by separate water unit are combined, can adapt to all kinds of system of water requirement

are widely used in industrial boilers, heat exchangers, laundry equipment, food industry, textile printing and dyeing industries and technical requirements: 1, raw water hardness:

< 8 mg · N/L ( Mg equivalent/l)

2, water hardness: < 0. 03 MGN/L

3, the working pressure: 0. 2 - 0. 5 mpa working temperature: 0 40 ℃

4, concentration of raw water: <

5, 5 degrees working voltage: < 50 hz, 220 v

6, resin type, strongly acidic cationic exchange resin