What is the purpose of the large flow of water filter effect?

In fact about the characteristics of the large flow of water filter, direct influence is big flow water filter the purpose and use, so long time, there will always be wear and tear, it will also affect its purpose and use, so everyday to keep maintenance of large flow of water filter.

the maintenance of large flow water filter method and the process:

(1) check the o-rings, then cleaning cartridge seal, flat on the seal groove.

2) using the process liquid soak o-rings.

(3) to get off bags, cover head, tighten the rings hold-down bolts.

4. Open the shell at the top of the vent valve effectively.

5. Open the inlet valve, make the liquid into the shell until the issue from the bleed valve, close the purge valve.

6. Slowly open the outlet valve effectively, then slowly open the inlet valve effectively.

7 to 10 'filter with flow rinse 5 ~ 10 minutes.

end filter cannot withstand heavy traffic impact, also can't let its opposite direction under pressure.

the characteristics of large flow water filter is mainly manifested in six aspects:

1, filtration precision scope more extensive, can be in 0. 1 - 100 um to choose between them.

2, big flow water filter material for higher polypropylene, without adding any adhesive, greatly reduces the probability dissolution the filter column itself.

3, this is a very good filter products chemical compatibility, resistant to strong acid at the same time. Strong base, the filters can be applied to some organic solvents and strong acid and alkali chemical filters.

4, this filter pollutant carrying capacity is very good, and entrapment efficiency is very high in the quality of particulate matter.

5, the filter can bear high temperature, high temperature resistant performance is very good, can work under the environment of high temperature at the same time, to withstand repeated high temperature and high pressure disinfection.

6, the filter is very high mechanical strength, which prolongs the service life of it.