the factors influencing PP cotton filter to filter traffic



we are in the process of using water purifiers, water purifiers used long after the flow will be slower and slower, it has to do with the service life of filter element, because the filter used for a long time, its surface can easily be particles, impurities clogging double aperture, so traffic will reduce, in addition to the factors of the filtering, normal new PP cotton filter traffic affected by those factors, the following small butterfly to introduce!


the influencing factors of PP cotton filter traffic
1, the size of the filter element;

The longer the
the size of the PP cotton filter, the flow rate, the greater the commonly used filter size;

10 inches, 20 inches, 30 inches, 40 inches, 20 inches than 10 inches high, 30 inches than 20 inches high, 40 inches than 30 inches high,
PP filters inside diameter, inner diameter, the greater the flow is relatively large, the diameter, the greater the flow relatively.

2.
The precision of the filter element;


PP cotton filter commonly used precision;
1μ
米,5μ;
米,10μ;
m、20μ
米,30亩;
米,50亩;
米、100亩;
m。

Aperture, with a higher precision, the greater the relative is, the more the amount of water through the resistance is smaller, so traffic is large.

3, the number of factors;


the more quantity, the greater the flow will be, for example, the same conditions, a 10 inch PP cotton filter traffic is 0.

25 t/H, then four PP cotton filter traffic can reach 1 t/H.

4, filter medium;


filter liquid viscosity, as well as the filtering liquid impurity content and so on, the more thin, less impurity particles of liquid, the filtration resistance is small, transparent water, flow is big, the smaller the opposite.

5.
Operating temperature and operating pressure;


different pressure, the flow will be different, the same conditions, the greater the pressure, flow rate will lead to greater.
The higher the temperature, flow rate is relatively larger.


the following is the flow of PP cotton filter reference table


initial precision filtration efficiency of 96%

the largest particle filtration efficiency of 99%

the filtering low cost - of long life
-
-
-

Large aperture part enough space to accommodate large particles, small aperture section can stop the fine

small particles, ensures that the filtering precision and prolongs the service life.



security -
-
-
-

Raw material non-toxic harmless, odorless, safe and reliable, the production process without chemicals.

The first level of filtration: 5μm PPF filter element, commonly known as coarse filter or PP cotton
Specification: 10 inches (25.4 cm)
Filtration accuracy: 5 microns
・Treatment water volume: about 6 tons, it is recommended to replace in 3 months
・Function: It can effectively filter out coarse solid impurities such as rust and sand in the water.

The second level of filtration: granular activated carbon filter
Specification: 10 inches (25.4 cm)
・Treatment water volume: about 12 tons, it is recommended to replace in 6 months
・Function: Granular high-absorptive activated carbon, which can effectively absorb chlorine, odor, color and other substances in water.

The third level of filtration: block activated carbon filter element or 1μm PPF filter element
Specification: 10 inches (25.4 cm)
・Treatment water volume: about 12 tons, it is recommended to replace in 6 months
・Function: Removal of pesticides, residual chlorine and other organic matter, iron and manganese and other heavy metals, bacteria, odor, color, and strong carcinogen chloroform.

The fourth level of filtration: RO reverse osmosis membrane
・Function: A reverse osmosis membrane with a pore size of 0.0001 microns can effectively remove bacteria, toxins, heavy metal ions, salt and other harmful substances in the water.
The fifth level of filtration: post-installed antibacterial activated carbon filter, commonly known as small T33
Specification: 10 inches (25.4 cm) / 1/4 inch water outlet
・Treatment water volume: about 12 tons, it is recommended to replace in 6 months
・Function: Inhibit bacterial regeneration, improve pure water outlet
Level 6: Nano antibacterial far-infrared activation ball, which has far-infrared radiation and antibacterial functions, is insoluble in water, safe and non-toxic. Studies have shown that when water passes through the activation ball, the nano antibacterial far-infrared activation ball can release far in water. Infrared rays change the structure of water molecules and activate water, greatly increase the amount of dissolved oxygen in the water, accelerate human body absorption, and improve circulation in the human body. At the same time, far infrared rays have antibacterial and antibacterial effects;

The seventh level: High-efficiency anion mineralization ball is a kind of silicate mineral that is calcined at high temperature through a combination of scientific formula and traditional technology. It is rich in various trace elements required by the human body and can be released in water It produces minerals and negative ions that are beneficial to the human body, which can improve the human blood circulation and effectively prevent the occurrence of hypertension, coronary heart disease and other diseases.

Which is the best water purifier filter?

1. PP cotton filter element. PP cotton is a kind of man-made fiber, which is easy to clean and has high elasticity. It is a harmless material. The PP cotton filter element is small in size, easy to install, good in filtering effect, and low in price, so it is very suitable for home use.

2. Activated carbon filter element. According to the adsorption function of activated carbon, the activated carbon filter element has the functions of purification and catalysis, playing a dual purification function, and can effectively remove impurities in the water.

3. Ultrafiltration membrane filter element. The service life of the ultrafiltration membrane filter element is about one year, that is, it needs to be replaced after one year. The water quality filtered by the ultrafiltration membrane filter element is also very clear. The ultrafiltration membrane filter element has a strong antifouling ability, so it is also widely used in purifiers.

4. RO membrane filter element. The RO membrane filter element adopts the principle of reverse osmosis. When water passes through the ultrafiltration membrane filter element, impurities such as bacteria, germs, and heavy metals cannot pass through and are isolated to ensure the safety and health of the water.


How to change the filter element of the water purifier

The following is about the operation of changing the filter element of the water purifier.

1. Tools: filter element, Phillips screwdriver or slotted screwdriver, pliers.

2. Turn off the power of the water purifier to prevent electric shocks during installation.

3. Close the three-way valve of the water purifier. Do not open the filter cover directly. Turn off the water source before operating.

4. Open the cover of the filter element. Generally, the cover of the filter element is in rotating mode, and rotate in the correct direction according to the label.

5. Take out the old filter element from the water purifier, and then rinse the inside of the water purifier.

6. After the new filter element is installed, close the filter element cover and open the valve to test. After 10 minutes, there is no problem or no abnormal sound.

How to replace the water purifier filter element

Tools/Materials
RO filter

Screwdriver, pliers

?

Method/Step 1:
Before replacement, first close the electroplating ball valve, press the flush button and wait for about ten minutes to let the system automatically reduce the pressure.

Method/Step 2:
Unscrew the nut joint on the right side of the membrane shell by hand or a tool, and pull out the water pipe.


Method/Step 3:
Close the ball valve of the pressure bucket, unscrew the nut joint above it with your hand or a tool, and introduce the water pipe into an empty bucket or washing tank.

Method/Step 4:
Hold the reverse osmosis membrane tube tightly with your hands, then clamp the old reverse osmosis membrane with pliers (or special tools), and pull it out of the membrane shell.

Method/Step 5:
Open the cover of the new reverse osmosis membrane and take it out.




Method/Step 6:
Insert the newly opened reverse osmosis membrane into the reverse osmosis membrane tube until the end with two small black 'O' rings reaches the bottom of the membrane shell.

Method/Step 7:
Tighten the membrane shell cover in the opposite direction of turning the membrane shell cover.

Method/Step 8:
Insert the water pipe and tighten the joint nut. (Remember not to forget to put the pipe plug, except for the quick-connect connector).

Method/Step 9:
Open the electroplating ball valve. Let the machine run for more than two hours to make the system enter the normal state of producing water, then connect the water pipe to the pressure bucket ball valve and open the pressure bucket ball valve.



Precautions
Water usually overflows during the replacement process, so prepare cleaning utensils such as a basin or towel.

?Ensure power-off operation during the whole process.

In the water treatment industry, a large flow water filter element is one of the commonly used equipment, which plays a very good role and helps in filtration. As one of the important parts of water treatment, the high-flow filter element is not only used for the large flow rate of the monomer, but also one of its advantages to help companies improve filtration efficiency and save costs. At the same time, its high strength and large processing capacity also make it an irreplaceable role and play a huge advantage in work. As for the high-flow water filter element, its main structure is its internal and external skeleton form. This structure can allow it to withstand a certain degree of pressure difference. The traditional design of the large flow filter element has a spliced u200bu200bskeleton form, which is composed of multiple skeletons, so there may be a hidden danger of insufficient compressive strength. If the working conditions are poor and the water treatment environment is harsh, it may cause The skeleton is deformed, reducing the service life of the high-flow filter element. Nowadays, the new high-flow water filter element produced by our company adopts an integrated integral skeleton. The integral skeleton of this new large-flow filter element adopts an integrated skeleton, which is no longer like the traditional form of splicing, and its integrity and pressure resistance are stronger and the highest It can withstand 0.4Mpa pressure difference, not only has high strength, but also has strong pressure resistance and high cost performance. The new large-flow filter integrated frame has been optimized in all aspects. It has made great improvements in the filter layer process and other aspects. The folding method adopts the new 'W' tooth folding form, which makes the effective use of the filter material. Increased, compared with the traditional form of filter media, the use efficiency has been increased by 30 points, while the filter area and efficiency have been effectively increased, the dirt holding capacity has been significantly increased, and the service life has been greatly improved.
It isn't just about being on water filter cartridges supplier anymore–it's about maximizing the potential of the platform of manufacturing.
With all the pros and cons of different in mind, click Lvyuan Water Purification Equipment to learn more about and decide which water filter cartridges supplier option is best for your case.
can be used in a wide variety of ways.
Guangzhou Lvyuan Water Purification Equipment Co., Ltd. deems water filter cartridges supplier as evolutionary rather than revolutionary. We've always had these 'social commerce' marketplaces in some form.
Like anything else in water filter cartridges, there are a variety of choices and types to choose from, and each of them will affect your budget in some form. Guangzhou Lvyuan Water Purification Equipment Co., Ltd. offers a range of quality at competitive prices.

In recent years, there has been a growing interest in water filtration systems and their potential health benefits. One type of water filter that has been gaining popularity is the 1 micron sediment filter. This type of filter is known for its ability to remove tiny particles and sediments from water, resulting in cleaner and safer drinking water. But aside from improving the taste and quality of water, what are the longevity benefits of a 1 micron sediment filter? In this article, we will explore the various ways in which a 1 micron sediment filter can contribute to a healthier and more sustainable lifestyle.

The Basics of 1 Micron Sediment Filters

1 micron sediment filters are designed to remove particles that are as small as 1 micron in size from water. These filters are typically made from materials like polypropylene, which are known for their ability to effectively trap and remove tiny particles from water. As water passes through the filter, any particles that are larger than 1 micron are trapped, leaving behind cleaner and clearer water.

One of the key benefits of using a 1 micron sediment filter is that it can help to protect other water filtration systems in your home. For example, if you have a reverse osmosis system or a UV water purifier, using a 1 micron sediment filter as a pre-filter can help to extend the lifespan of these systems by preventing them from becoming clogged with sediment and debris.

Improved Water Quality

Using a 1 micron sediment filter can also lead to improved water quality. By removing particles as small as 1 micron, these filters can help to reduce the presence of sediment, rust, sand, and other impurities in your water. This can result in water that is not only cleaner and clearer but also free from any unpleasant tastes or odors that may be caused by these impurities.

In addition to improving the taste and appearance of your water, removing these particles can also contribute to better overall health. Drinking water that is free from sediment and other impurities can help to prevent gastrointestinal issues and other health problems that may be associated with contaminated water.

Extended Lifespan of Plumbing and Appliances

Another longevity benefit of using a 1 micron sediment filter is the potential to extend the lifespan of your plumbing and household appliances. When water contains high levels of sediment and other impurities, it can lead to the buildup of scale and deposits in your pipes, water heater, and other appliances that use water. Over time, this buildup can lead to reduced water flow, decreased efficiency, and even premature damage to these systems.

By using a 1 micron sediment filter to remove these particles from your water, you can help to reduce the likelihood of scale and deposits building up in your plumbing and appliances. This can lead to improved water flow, increased efficiency, and a reduced risk of costly repairs or replacements in the future.

Environmental Sustainability

In addition to the benefits for your health and the longevity of your home systems, using a 1 micron sediment filter can also contribute to environmental sustainability. By removing tiny particles and impurities from your water, you can reduce the need for single-use plastic water bottles and other disposable water containers.

In many areas, the quality of tap water may not meet certain standards, leading to a reliance on bottled water. However, by using a 1 micron sediment filter to purify your tap water, you can reduce your reliance on bottled water and the associated plastic waste. This can contribute to a reduction in your environmental footprint and a healthier planet for future generations.

Cost Savings

Finally, using a 1 micron sediment filter can lead to cost savings over time. By improving the quality of your water and extending the lifespan of your plumbing and appliances, you can reduce the need for frequent maintenance and repairs. Additionally, by reducing your reliance on bottled water, you can save money on purchasing single-use plastic water bottles.

In conclusion, the longevity benefits of a 1 micron sediment filter are numerous and varied. From protecting other water filtration systems to improving water quality, extending the lifespan of plumbing and appliances, and contributing to environmental sustainability, there are many reasons to consider incorporating a 1 micron sediment filter into your home water filtration system. By making the switch to cleaner and safer water, you can enjoy the peace of mind that comes with knowing that you and your loved ones are drinking water that is free from harmful contaminants.