Guangzhou Lvyuan Water Purification Equipment Co., Ltd. has been focused on high flow water filter business for many years. The employees are all well experienced and skillful. They are always ready to offer support. Thanks to the reliable partners and the loyal employees, we have developed a business marketable in the world.

Lvyuan is highly considered at the ptfe filterbusiness. Lvyuan's ptfe filter series include multiple types. The raw materials used in the production of Lvyuan high flow water filter for water filtration are of premium quality. The self-supporting fiber matrix enables a coreless design that is both economical and strong. There is a very broad development prospect of this product owing to these features. Its filter medium is customizable according to the different water quality in the application.

we has always pursued excellence and professionalism in the sintered metal filter field. Inquire online!

inches of microcellular pp folded filter


inches of microcellular pp folded filter product introduction:
the filter of pollutant carrying capacity is strong, long service life of low cost.
it is widely used in water purification processing industry, it is made of polypropylene avirulent insipidity of particles,
supported by fiber membrane. It can be used in all kinds of injection, liquid filter.


inches of microcellular pp folded filter features:
outstanding chemical compatibility, can be used in strong acid, strong alkali chemical solvents.
the fiber membrane filter has big filter area,
accuracy is diversiform, can satisfy choose


inches of microcellular pp folded filter parameters:
filter material: polypropylene
seal material: silicon rubber
disinfection temperature time: c
end cover forms: double opening, flat cap, etc.

guangzhou filter source water filter co. , LTD. Other products: coalescence filter

SLQSS series of acidic water filter
LFT fell * ceramic filter
special nipple plant folded filter
many folding standard filter

M special specifications can be customized according to user's url

Activated carbon filter containing the processed porous granular or small pieces of carbon block, only 4 grams of the surface area of activated carbon equivalent of a football field, this is a huge surface area, activated carbon can be very effectively adsorption ( Basically eliminate) Pollutants and other substances. When the water flow through the activated carbon filter, other chemicals may be carbon, resulting in a more pure water, the effect depends on the water flow rate and temperature, as a result, most of the smaller activated carbon filter should be used with low pressure and the cold water. In addition to the surface area of activated carbon filter may have different skills, in terms of the size of its decontaminated, one factor is coconut shell activated carbon was proved to be effective, the quality of the activated carbon can also be made of wood or coal as granular activated carbon or carbon blocks for sale. Another factor is the filter allows by particle size, because it provides a defence, granular activated carbon ( GAC) Is a kind of porous material, there is no specific limit, on the other hand, in the form of carbon blocks of active carbon aperture is usually at 0. Between 5 to 10 microns, the small size of the problem is that even the water particles through hard, water can also be reduced.

The performance of the PP pleated filter element microfiltration membrane needs to be measured. The measurement method mainly starts from four aspects, which are membrane defects, membrane thickness, membrane apparent density and porosity. 1. Determination of membrane defects. Film defect refers to the existence of holes in the surface or deep layer of the film, and their existence has a direct impact on the performance of the film. Therefore, the defective film should be removed before use. Defective membranes can generally be inspected visually or with the aid of a microscope, and can also be determined by bubbling by immersing them in water (or in the non-solvent of the membrane). 2. Measurement of film thickness. Generally, a spiral micrometer or thickness gauge is used for measurement, and it can also be measured visually under a microscope or electron microscope. 3. Determination of apparent density of film. Generally, a weighing method is used to first weigh the mass of the film, and then calculate the volume based on the measured film thickness and inner and outer diameter data. The ratio of the two is considered to be the apparent density of the film. 4. Determination of porosity.
The , essentially perfected by water filter cartridges, is one of the first home appliance to be widely distributed.
Looking for a company to handle your water filter cartridges supplier water filters? Visit Lvyuan Water Purification Equipment today for more information.
So, what's a manufacturer to do? Familiarize ourselves with producing water filter cartridges supplier in various technologies.