Where are the techniques for storing high-flow filter elements?

The high-flow water filter element adopts a double-layer structure mode, and its interior is made of double-layer polypropylene material. It is divided into two layers of filtration. The inner layer is the final filter layer, and the outer layer is made of coarse non-woven fabrics. The pore size of the filter layer is slightly different. The outer layer of the high-flow water filter element mainly plays the role of pre-filtration. The inner and outer brackets are divided into two materials, mainly polypropylene or stainless steel. Its inner layer is the final filter. The high-flow filter element is The water filter element that combines the pre-filtration and final filtration with each other is also the guarantee of its filtration effect. The core of the high-flow filter element is mainly membrane, and its filter membrane material is mainly polypropylene non-woven fabric. The structure of the high-flow filter element is divided into two parts, mainly including the diversion layer and the support fold, in which the shell is installed, and then the center tube is inserted into it. All parts of the high-flow filter element are welded by hot-melt welding without any adhesives, thus forming a complete one-piece filter element, which does not contain chemical substances. Large-flow filter element has obvious advantages in the industry. It is different from ordinary water filter element. It has more prominent technical advantages, its own filtration efficiency is relatively high, and it also has the characteristics of long life and strong dirt holding capacity. The outstanding filtration efficiency and strong dirt holding capacity make it have a broad application market. In the market and actual use, the dirt holding capacity of the high-flow filter element can reach about 15KG. For the high-flow filter element, because of its great effect, the frequency of use is relatively high, and it may need to be replaced within 1-3 months of use. Therefore, a larger number of large-flow filter elements are generally purchased as spares to prevent problems. Therefore, special attention should be paid to the storage method of the high-flow filter element. The storage method of the large flow filter element: 1. The large flow filter element cannot be placed in the open area. It needs to be stored in a dry and ventilated environment to avoid contamination of the large flow filter element due to the open air or humid environment and affect its normal use. 2. When amplifying the flow filter element in the warehouse, be sure to avoid harmful gases or corrosive substances in the warehouse, and put them away. At the same time, it is necessary to ensure the temperature in the warehouse, control the temperature at an appropriate temperature, maintain the humidity and temperature in the warehouse, and monitor changes and conditions at any time. 3. The material of the high-flow filter element is different, and the storage method is also different. Therefore, we must store it reasonably according to the material to ensure the correct placement area. At the same time, the storage should be classified according to the specific types and specifications, so as to avoid troubles or even loss in future use.
However, water filter cartridges supplier isn't the only producer in domestic, and many people feel that Guangzhou Lvyuan Water Purification Equipment Co., Ltd.'s service leaves much to be desired in terms of functionality and design.
What are you waiting for? Get out there and buy some of the most effective at Lvyuan Water Purification Equipment .
To strengthen and grow our leadership position by providing water filter cartridges supplier across a range of market segments, including industrial filters manufacturer, and high-performance servers.
The proprietor has many years experience in providing promotion services and is a sought after expert in water filter cartridges supplier.