2539 x39x105 m316kg = 0.16

How to effectively avoid filter is sucked flat in a work situation, filter improper use or choose not appropriate filter, suck flat would happen in the filter work, that how to effectively avoid.

We summarized some may appear the cause of the above several aspects:


1.
Filter blockage, there is no change in time.

Filter pollutants blocking in work and has not been timely cleaning, lead to filter differential pressure increases, the filter strength enough to filter flat.




2.

Filter option is not appropriate, at the time of filter selection is not suitable for the current working environment, selected high filter precision, or pressure over the permissible working pressure.
Can also lead to filter absorption of flat.

There are a lot of customers think choose stainless steel sintering network filter, sintering felt filter can avoid this situation, but the fact is not like that, these two kinds of stainless steel filter although itself has certain compressive capacity, but exceeded its own compressive capacity, also can appear flat absorption phenomenon, we want to make appropriate adjustments according to the working pressure, such as skeleton, such effect will be better


3.

Improper installation, the installation of the filter element to do accurate and stable, and work in the filter has already started without a fixed filtering, so that the filter was damaged.

The main working principle of water purifier is through the role of the physical filtration multilevel filter filter pollution pollutants in water, but how to filter per level inside specific filtering effect, filter the source for your explanation of cartridge filter at all levels.


activated carbon filter mainly through adsorption to remove the peculiar smell in the water, organic matter, etc.

Chlorine in tap water, that you have great oxidation of reverse osmosis membrane, so must be removed by active carbon.

Water and tap water as water source of laboratory pure water machine is generally has two outlet, the three levels of water and water level, water by reverse osmosis water is level 3, stored in a tank, respectively, and water level is the box that is not stored.

Level 3 didn't pass the water purification column, level of water through the purification column, water level is higher than the cost of water level 3.

So customers in daily application, should according to the water quality demand high quality water, as far as possible need not when can triple water level water, avoid the rising costs.


reverse osmosis membrane is very important part in the water purifier, the pore size is very small, so in the use process are often bacteria such as micro material deposition on the surface, the general has function of backwash water purifier, to remove pollutants.

Water consumption within the 10 liters/day, washes 3 -
More than 5 times, more than 10 liters, rinse several times.

If long time need not, needs to be soaked in disinfectant and avoid bacteria breeding, but the process is more troublesome, suggested that even if you don't water, often start with a small amount of water, let the machine internal circulation of water, reduce water deposit time is too long.


precision filter, also known as filter filter, can be divided into round filter and pp melt-blown filter, main filter sediment in the raw water large particles, such as its filtering precision is 5 microns, such as 1 micron.


sales on the market at present the water purifier filter is widely, different filter function also is different, the filter element is used to remove the rust from the water, sediment, or used to remove odor elimination of residual chlorine in water and more significant and helpful for the consumers.